UniqueKiosk · Shenzhen workshop
Cliff Black Metal Three-Tier Countertop Display, 800 mm
$110.00
Countertop display in black steel with three tray tiers and an arched top rail. Price range: USD 110-240, set by tier count and height.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Three Trays
This countertop display stands 800 mm tall and 620 mm wide. A countertop display with three trays keeps stock at three heights. Each tray runs 600 mm wide and 300 mm deep. The tray gap runs 240 mm, so a tall jar clears the shelf above. A lip at the tray edge stops a round jar from rolling. A shop loads the set from the front in one pass. A display stand uses this tray.
Rod Frame
The frame is 12 mm steel rod with a black powder coat. A countertop display in this frame holds its line on a busy counter. The arch ties the two sides at the top, so the frame resists a side push. The trays weld to a bracket at each corner. The coat bakes at 180 degrees, so a joint stays covered. A damp cloth takes a mark off the rod.
Counter Fit
The feet run as small curls, so the stand sits flat on a counter. A countertop display of this size needs 320 mm of depth. The weight at 12 kg keeps the frame still during a load change. A shop sets it at the end of a counter or beside a till. The bottom tray sits at 60 mm, so a tall box still fits. A card rail clips to the arch. Our retail display set shares this foot.
| Specification | Detail |
|---|---|
| Height | 800 mm |
| Width | 620 mm |
| Tiers | Three |
| Tray | 600 x 300 mm |
| Rod | 12 mm steel |
| Load | 15 kg per tray |
| Weight | 12 kg |
Shop and Show
A gift shop sets this countertop display near a till. A bakery uses one for boxed goods. A coffee shop uses one for retail bags. A trade show uses one on a booth table. Countertop displays of this build pair with a card holder. A counter of 900 mm holds two stands side by side. A store fixture plan starts here.
Build Notes
The rod is cut on a bender with a stop, so two stands match in width. A countertop display of this build keeps a square frame after a move. The tray is pressed, then welded at the bracket. The arch is formed on a jig, so the curve reads even. Each unit is checked for a level tray and a firm foot before packing. Read our bench notes for the weld detail.
Sizes and Price
Height runs at 600, 800 or 1000 mm for this countertop display. Tier count runs at three or four. Width runs at 500 or 620 mm. The coat comes in black, white or a brass finish. A card holder, a glass shelf and a carry carton are options. List price starts at USD 110 for the 800 mm unit. ukiosks builds this countertop display in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.