UniqueKiosk · Shenzhen workshop

Alder Black Wire Grid Outrigger Display, 1700 mm

$145.00

Outrigger display in black steel with two grid panels, peg hooks and two side shelves. Price range: USD 145-320, set by panel count and width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Outrigger Shelves

This outrigger display stands 1700 mm tall on a 600 mm width. An outrigger display with two side shelves adds stock space at the frame edge. Each shelf runs 300 mm deep and 250 mm wide. The shelf arm ties to the frame with a steel bracket. The arm holds up to 8 kg of folded stock. A shopper reaches the shelf from the aisle without a step. A retail display run uses this arm.

Grid and Hooks

Two wire grid panels at 900 mm stack on one frame. An outrigger display with this grid takes 48 peg hooks. The wire runs 6 mm with a 75 mm pitch, so a hook clips at any cell. The hooks carry a 3 kg load each. A bag hangs by its handle on a hook, so the print faces out. A shop moves a hook by one cell in seconds. Our grid panel set shares this pitch.

Steel and Coat

The frame is 25 mm steel tube with a black powder coat. An outrigger display in this coat keeps a firm line under a spot lamp. The grid panels are welded wire with the same coat. The coat bakes at 180 degrees, so a hook clip holds tight. The base is a plate on four castors. A damp cloth takes a dust line off the frame.

Specification Detail
Height 1700 mm
Width 600 mm
Panels Two, 900 mm
Hooks 48
Shelves Two side
Base Plate on castors
Weight 34 kg

Shop Use

A boutique sets this outrigger display at a wall end. A bag shop uses one for a seasonal line. A trade show uses one at a booth corner. A mall unit uses one in a walkway bay. Wire grid displays of this build pair with a grid basket. A floor space of 800 mm holds the base with room to reach both shelves. A store fixture plan starts here.

Build Notes

The frame is cut with a stop, so two racks match in height. An outrigger display of this build keeps a square frame after a move. The shelf arm is welded on a jig, then coated with the frame. The grid panel is punched on a press, so each cell sits true. Each unit is checked for a level shelf and a free castor before packing. Read our bench notes for the weld detail.

Sizes and Price

Height runs at 1500, 1700 or 1900 mm for this outrigger display. Panel count runs at one or two. Width runs at 500 or 600 mm. The coat comes in black, white or a chrome finish. Extra shelves, a top sign and a lock bar are options. List price starts at USD 145 for the 1700 mm unit. ukiosks builds this outrigger display in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Alder Black Wire Grid Outrigger Display, 1700 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop