UniqueKiosk · Shenzhen workshop

Moss Clear Acrylic Clip-On Sign Holder, 180 mm

$45.00

Sign holder in clear acrylic with a rotating clamp head and a spring clip. Price range: USD 45-95, set by frame size and card type.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Clamp and Head

This sign holder stands 180 mm tall with a 200 mm frame. A sign holder of this build clamps on a rail up to 25 mm thick. The clip jaw opens 30 mm, so a board edge fits with a pad. The head turns 180 degrees, so a card faces the aisle or the shelf. A thumb nut locks the angle at one point. A staff member swaps a card in ten seconds. A rail clip suits this head.

Acrylic Pocket

The frame holds a card at 1.5 mm thick acrylic. A sign holder in this face keeps a clean edge under a lamp. The pocket opens at the top, so a card slides in from above. The back plate sits 2 mm behind, so the card stays flat. A printed sheet at 160 gsm fits without a fold. A dry cloth clears a finger mark.

Shelf and Rail

The clip takes a round tube, a square tube or a shelf edge. A sign holder of this kind suits a wire shelf or a gondola rail. The clamp face carries a rubber pad, so a coated rail keeps its paint. A shop sets three holders on one rail for a promo run. A holder points up or down, so a top shelf card still reads. A counter edge works as well. Our shelving set uses this clamp.

Specification Detail
Height 180 mm
Frame 200 mm wide
Card A5
Clamp 25 mm rail
Acrylic 1.5 mm clear
Head Turn 180 deg
Weight 0.2 kg

Store Use

A supermarket sets this sign holder on a promo rail. A clothing shop uses one on a round rack. A pharmacy uses one for a shelf talker. A garden centre uses one for a price card. Sign holders of this build pair with a shelf strip. A rail at 900 mm keeps the card at eye level for a standing customer. A retail display run holds these.

Build Notes

The frame is cut on a laser, so each pocket matches in width. A sign holder of this build keeps a clear face after a move. The acrylic edge is flame polished, then checked by hand. The clip is a moulded part with a steel spring. Each unit is checked for a free turn and a firm grip before packing. Read our bench notes for the polish detail.

Sizes and Price

Frame runs at A6, A5 or A4 for this sign holder. Height runs at 150 or 180 mm. The clamp comes for a 20 or 25 mm rail. The finish comes in clear, white or black. A shelf strip, a card set and a storage box are options. List price starts at USD 45 for the A5 unit. ukiosks builds this sign holder in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Moss Clear Acrylic Clip-On Sign Holder, 180 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop