UniqueKiosk · Shenzhen workshop

Arno Black Wire Grid Panel Tower Set, 1700 mm

$145.00

Gridwall panel towers in black steel wire with T-feet and straight hooks, sold as a pair. Price range: USD 145-320, set by panel size and hook count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Mesh and Frame

This gridwall panel tower stands 1700 mm tall and 600 mm wide. A gridwall panel of this mesh carries a 75 mm square opening, so a hook clips in at any point. The frame is 20 mm tube with a black coat. A cross bar joins the two halves at mid height, so the panel does not bow. The mesh runs flat to the frame, so a hook sits square. Two panels stand as a pair. A display stand uses the same frame.

Feet and Hooks

Each panel sits on a black T-foot with two arms. A gridwall panel on this foot stands alone without a wall. The arms run 500 mm, so a bag on a hook does not tip the panel. Six straight hooks come with the set. A hook takes a bag, a scarf or a small frame. A sign holder clips to the top frame with two clips.

Steel and Load

The mesh is 3 mm wire welded at each joint. A gridwall panel of this build takes 20 kg spread over the face. The frame is a tube with a welded corner, then a powder coat at 180 degrees. The foot is a flat plate with a socket and two screws. The coat resists a scratch at a hook point. A damp cloth takes the dust off the mesh. Our store fixture set shares this coat.

Specification Detail
Height 1700 mm
Width 600 mm
Mesh 75 mm square
Frame 20 mm tube
Foot T-shape, 500 mm
Hooks Six straight
Weight 16 kg pair

Craft Fair and Shop

A craft fair sets this gridwall panel tower on a table or the floor. A pop up shop uses a pair for a wall face. A showroom uses four for a back wall. A salon uses one for a product line. Wire grid displays of this build pair with a wire basket shelf. A bay of 1.2 m holds the pair with room to walk. A shelving unit sits beside it.

Build Notes

The mesh is welded on a jig, so each square stays true across the face. A gridwall panel of this build keeps a flat face after a move. The frame corners are ground, then coated with the mesh in place. The hook is a bent wire with a flat tip. Each set is checked for a level foot and a tight mesh before packing. Read our bench notes for the weld detail.

Sizes and Price

Height runs at 1500, 1700 or 1800 mm for this gridwall panel tower. Width runs at 600 or 900 mm. Set size runs at one, two or four panels. The coat comes in black, white or a chrome finish. A shelf, a sign clip and a castor set are options. List price starts at USD 145 for the two panel set. ukiosks builds this gridwall panel tower in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Arno Black Wire Grid Panel Tower Set, 1700 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop