UniqueKiosk · Shenzhen workshop

Abel White Spiral Clothing Rack with Two Rails, 1500 mm

$380.00

Spiral clothing rack in white steel with two spiral rails, ball stops and a round base. Price range: USD 380-720, set by height and rail count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Spiral Rail

This spiral clothing rack stands 1500 mm tall on a 500 mm base. A spiral clothing rack turns a full circle in two steps, so a row reads from four sides. The rail runs 28 mm tube with a ball stop every 60 mm. Each ball keeps a hanger at its place, so a row stays even. The rail turns 720 degrees from the base joint to the top. A customer walks the rack and finds a size. A display stand uses the same base.

Hanger Capacity

A rail of this length takes about 40 hangers on each turn. A spiral clothing rack of this build shows a full line in a narrow bay. Hangers sit on the ball stops, so a gap opens where stock sells out. The bottom rail runs at 900 mm and the top at 1400 mm. A long coat on the top rail clears the floor line. A short top on the lower rail keeps it in reach.

Steel and Coat

The pole is a 32 mm steel tube with a white powder coat. A spiral clothing rack in this coat keeps a clean face after a season. The rail is a bent tube with a welded ball at each stop. The coat bakes at 180 degrees, so a joint reads smooth. The base is a round plate with four feet and a pole socket. A damp cloth takes dust off the rail. Our store fixture set shares this coat.

Specification Detail
Height 1500 mm
Rails Two, 720 deg
Rail Tube 28 mm
Ball Stop Every 60 mm
Base 500 mm round
Capacity About 80 hangers
Weight 12 kg

Boutique and Pop Up

A boutique sets this spiral clothing rack near a fitting room. A pop up stall uses one for a capsule line. A showroom uses one for a sample row. A hotel shop uses one for a resort line. Clothing racks of this build pair with a mirror panel. A floor of 1.2 m square holds the rack with room to walk round. A fitting room sits beside it.

Build Notes

The rail is bent on a mandrel, so the pitch stays true at each turn. A spiral clothing rack of this build keeps a round sweep after a move. The ball stops are welded and then ground flat by hand. The pole sections join with an inner sleeve and two screws. Each unit is checked for a level base and an even rail before packing. Read our bench notes for the bend detail.

Sizes and Price

Height runs at 1300, 1500 or 1700 mm for this spiral clothing rack. Rail turns run at one, two or three. Base size runs at 450 or 500 mm. The coat comes in white, black or a chrome finish. A castor set, a top sign and a dust bag are options. List price starts at USD 380 for the 1500 mm unit. ukiosks builds this spiral clothing rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Abel White Spiral Clothing Rack with Two Rails, 1500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop