UniqueKiosk · Shenzhen workshop

Trey Chrome Hat Display Rack with Six Pads, 700 mm

$130.00

Hat rack in chrome steel with six round pads on angled arms and a weighted base. Price range: USD 130-280, set by pad count and height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Pad and Arm

This hat rack stands 700 mm tall on a counter. A hat rack with six flat pads holds six hats in open air. Each pad runs 120 mm round with a grey felt face. The arms step in two rows, so a brim clears the row below. The arm angles up at 15 degrees, so a crown sits back. A shop swaps a hat without taking the pad off. A display stand uses this arm.

Chrome Pole

A chrome steel pole runs from the base to a finial at the top. A hat rack in this finish keeps a bright line under a shop lamp. The pole sections join with a collar, so the joint reads as a ring. The finial takes a small price tag. The collar holds a pad arm with a screw at each step. A cloth takes a print off the chrome.

Base and Load

The base is a black round plate at 300 mm with a cast foot. A hat rack on this base takes six hats and no tilt. Four pads sit under the plate, so a glass counter takes no mark. The plate holds a pole socket with a screw collar. The centre of mass sits low, so a hat on the top pad does no harm. A staff member lifts the rack by the pole. Our counter form uses the same plate.

Specification Detail
Height 700 mm
Pads Six, 120 mm
Pole Chrome steel
Arm Angle 15 degrees
Base Round plate, 300 mm
Load Six hats
Weight 4 kg

Hat Shop and Boutique

A hat shop sets this hat rack on a counter near a mirror. A boutique uses one for a seasonal straw line. A menswear shop uses one for felt hats. A resort shop uses one for sun hats. Cap and hat racks of this build pair with a brim gauge. A counter with 400 mm of depth fits the base with room to turn. A store fixture set sits beside it.

Build Notes

The pole is a drawn tube with a polished chrome plate. A hat rack of this build keeps a straight pole after a move. The arms are bent on a jig, so each pair matches in angle. The pad is a board disc with a felt wrap and a screw insert. Each unit is checked for a level pad row and a firm base before packing. Read our bench notes for the chrome detail.

Sizes and Price

Height runs at 550, 700 or 900 mm for this hat rack. Pad count runs at four, six or nine. Pad size runs at 100 or 120 mm. The finish comes in chrome, brass or a black coat. A price tag holder, a dust cover and a carry carton are options. List price starts at USD 130 for the 700 mm unit. ukiosks builds this hat rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Trey Chrome Hat Display Rack with Six Pads, 700 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop