UniqueKiosk · Shenzhen workshop
Pike White Pegboard Shelf Unit with Three Shelves, 1200 mm
$480.00
Pegboard shelf unit in white steel with three adjustable shelves and a basket option. Price range: USD 480-980, set by width and shelf count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Panel and Grid
This pegboard shelf unit stands 1800 mm tall and 1200 mm wide. A pegboard shelf face carries a 25 mm hole grid, so a hook or a basket clip fits anywhere. Two upright posts hold the panel at the back. The panel runs 30 mm off the post line, so a hook sits clear. The base deck runs 400 mm deep. A shop sets a basket over the lower deck for bulk stock. A pegboard merchandiser uses this grid.
Shelves and Load
Three white steel shelves sit on the pegboard shelf posts. A pegboard shelf with a 25 mm step sets a row in one lift. Each shelf carries 40 kg on a straight line. The brackets hook into the post slot, so no bolt shows at the face. The front lip runs 20 mm, so a box does not slide. A shop moves a shelf for a tall pack in a minute.
Steel and Coat
The panel, posts and shelves are 1.2 mm steel with a white powder coat. A pegboard shelf in this coat keeps a clean grid after a season. The holes are punched on a bed press, so the pitch stays true. The coat bakes at 180 degrees, so it does not chip at a slot. A damp cloth takes the dust off the deck. The white face lifts a dark pack. Our display shelf shares this coat.
| Specification | Detail |
|---|---|
| Width | 1200 mm |
| Height | 1800 mm |
| Depth | 400 mm |
| Shelves | Three, 40 kg each |
| Hole Grid | 25 mm |
| Panel | 30 mm offset |
| Weight | 38 kg |
Shop and Stockroom
A hardware shop sets this pegboard shelf unit in a bay for boxed tools. A craft shop uses one for paper and card. A pharmacy uses one for a care line. A stockroom uses one for a pick row. Retail shelving of this build pairs with a wire basket. An aisle with a 1200 mm bay fits the unit with room to reach. A store fixture set sits beside it.
Build Notes
The panel is punched, cut, then folded at the edge. A pegboard shelf of this build keeps a square frame after a move. The posts are a roll form with a slot every 25 mm. The shelf bracket is a steel plate with a hook at the back. Each unit is checked for a level deck and a true panel before packing. Read our bench notes for the slot detail.
Sizes and Price
Width runs at 900, 1200 or 1500 mm for this pegboard shelf unit. Height runs at 1500, 1800 or 2100 mm. Shelf count runs at three, four or five. The coat comes in white, grey or a black finish. A wire basket, a sign strip and a castor set are options. List price starts at USD 480 for the 1200 mm unit. ukiosks builds this pegboard shelf unit in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.