UniqueKiosk · Shenzhen workshop

Fenn Gold Steel Earring Card Display Stand with Fifteen Hooks, 240 mm

$65.00

Earring display stand in gold steel wire on a solid wood base, with fifteen cup hooks. Price range: USD 65-140, set by hook count and base wood.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Hook Rows

This earring display stand carries three rows of hooks at a 70 mm step. An earring display stand with fifteen hooks shows thirty pairs on a small counter. Each hook is a small cup at 8 mm, so a card hangs flat. The rows are spaced for a long drop and a short stud. The frame leans back at 8 degrees, so a card does not slip forward. The stand runs 240 mm tall. A jewellery display uses this frame.

Frame and Base

The frame is 3 mm steel wire with a gold plating. An earring display stand in this wire keeps a thin line on a counter. The wire ends sit in a wood block at 200 mm long. The block runs 25 mm thick with a lacquer face. Two short posts hold the frame above the block, so a card clears the wood. The base pad keeps the block off a glass top. Our countertop display takes the same block.

Card Fit

A standard earring card at 55 mm wide fits this earring display stand. The cup hook takes a punched hole at 3 mm. A shop swaps a card in seconds and keeps the row even. The hooks run at 35 mm spacing, so a wide card still clears its neighbour. A card with a long drop hangs below the bar with no fold. The stand also takes a small necklace card on the top row. A mirror riser widens the row.

Specification Detail
Height 240 mm
Hooks Fifteen
Frame 3 mm steel, gold plate
Base Wood block, 200 mm
Row Step 70 mm
Hook Spacing 35 mm
Weight 0.8 kg

Counter Use

A jewellery counter sets this earring display stand beside a ring tray. A craft stall uses two for a full line. A boutique puts one at a till for a small edit. A gift shop uses one for a seasonal pair. Earring displays of this build pair with a mirror riser. A counter with a low light bar likes the 240 mm stand, since the top row still clears the bar.

Build Notes

The wire is cut and bent on a jig, so two stands match in shape. An earring display stand of this build keeps a straight bar after a season. The hooks are welded at the bar, then plated with the frame. The wood block is cut and sanded, then sealed with a clear coat. Each unit is checked for a level base and a firm hook before packing. Read our bench notes for the jig detail.

Sizes and Price

Height runs at 200, 240 or 300 mm for this earring display stand. Hook count runs at nine, fifteen or twenty four. The frame comes in gold, silver or a black plate. The base comes in pine, beech or a black block. A card pack, a dust bag and a carry case are options. List price starts at USD 65 for the fifteen hook unit. ukiosks builds this earring display stand in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Fenn Gold Steel Earring Card Display Stand with Fifteen Hooks, 240 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop