UniqueKiosk · Shenzhen workshop

Elm Duo Tier Watch Display Stand with Marble Base, 200 mm

$120.00

Watch display stand with two leather cushions on steel rods and a marble base. Price range: USD 120-260, set by cushion count and base finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Cushion Pair

This watch display stand holds two cushions at a 60 mm step. A watch display stand of this pair shows a band at the top and a face at the lower level. The cushions run 110 mm long and 60 mm thick. A leather face gives a bracelet a soft seat. A band wraps the cushion and the clasp sits behind. A watch display stand of this size fits a glass counter. A earring display sits beside it.

Rod and Base

Two steel rods rise from the base of this watch display stand at 8 mm. A watch display stand on rods keeps the cushion line light. The rods bend at a soft curve, so a band does not catch on an edge. A marble slab at 200 mm holds both rods. The slab runs 20 mm thick with a polished face. A shop sets the slab flat on a counter. Our countertop display uses the same rod.

Leather and Steel

The cushions are a padded core with a leather cover. A watch display stand in this cover takes a wipe and no shine. The leather stretches tight, so no wrinkle shows at a seam. The rods are 304 stainless, so no rust spot forms after a wipe. The marble face carries a grey vein, so each slab differs a little. The base pad keeps the slab off a glass top.

Specification Detail
Cushions Two
Base Grey marble, 200 mm
Slab Thickness 20 mm
Rod 304 steel, 8 mm
Step Height 60 mm
Cover Black leather
Weight 1.4 kg

Counter Use

A watch counter sets this watch display stand in a row of four. A jewellery shop uses one for a bracelet line. A pawn shop puts one at a till for a high value piece. A collector uses one at home for a display. Watch displays of this build pair with a ring tray. A counter with a low light bar likes the 200 mm stand, since the top cushion still clears the bar. A jewellery display fills the bay.

Build Notes

The rods are bent on a former, so two stands match in curve. A watch display stand of this build keeps a level cushion after a load. The leather is cut and stitched by hand, then fitted over a foam core. The slab is cut on a wet saw, so the edge stays true. Each unit is checked for a level base and a firm cushion before packing. Read our bench notes for the bend detail.

Sizes and Price

Cushion count runs at two, three or four for this watch display stand. Base size runs at 200, 300 or 400 mm. The base comes in grey marble, black stone or a wood block. The cushion comes in black, grey or a cream leather. A lock plate, a dust cover and a carry box are options. List price starts at USD 120 for the two cushion unit. ukiosks builds this watch display stand in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Elm Duo Tier Watch Display Stand with Marble Base, 200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop