UniqueKiosk · Shenzhen workshop

Wick Clear Acrylic Outdoor Brochure Holder with Lid, 230 mm

$95.00

Outdoor brochure holder in clear acrylic with a black lid and four fixing points. Price range: USD 95-190, set by size and lid type.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Box and Lid

This outdoor brochure holder stands 230 mm tall on a 300 mm width. The pocket takes a folded leaflet at 100 mm stack. An outdoor brochure holder with a lid keeps rain off a paper stack. The lid overhangs at 15 mm on each side, so a drip falls clear of the slot. The front opens on a wide slot, so a hand pulls a sheet without a lift. The box closes at the base, so a leaflet does not slide out. A acrylic display case uses the same sheet.

Acrylic and Seal

The box is 4 mm acrylic with a polished edge. An outdoor brochure holder in this sheet keeps a clear view of a printed cover. The joints are bonded with a solvent cement, so no gap holds water. The lid is a 6 mm acrylic cap with a seal strip. A shop wipes the face with a glass cloth. The clear sheet resists a yellow cast under sun for a season.

Mount and Fix

Four holes sit at the back of this outdoor brochure holder at 6 mm. An outdoor brochure holder of this size takes two screws at the top and two at the base. The set comes with wall plugs and screws. A wall with render needs a plug, and a brick wall takes a direct screw. The box stands 40 mm off the wall, so air moves behind the sheet. A shop can mount it beside a door at eye level. Our open sign sits beside it.

Specification Detail
Height 230 mm
Width 300 mm
Sheet 4 mm acrylic
Lid 6 mm cap, black
Fixing Four holes, 6 mm
Wall Gap 40 mm
Capacity 100 mm stack

Outdoor Use

A shop mounts this outdoor brochure holder beside a door for opening hours. A clinic uses one at an entrance for a service sheet. A hotel puts one at a gate for a map. A site office uses one for a safety note. Brochure holders of this size pair with a wall sign. A wall under a canopy likes the 230 mm box, since the lid still clears a drip line. A store fixture kit lists the plugs.

Build Notes

The box is cut on a laser bed, so four units match in size. An outdoor brochure holder of this build keeps a square edge in weather. The lid is bonded with a clamp for a full cure, so no air gap forms. The holes are drilled after the bond, so the sheet does not crack. Each unit is checked for a level base and a clear face before packing. Read our bench notes for the bond detail.

Sizes and Price

Height runs at 230, 300 or 380 mm for this outdoor brochure holder. Width runs at 300 or 400 mm. The lid comes in black, white or a clear cap. A card pocket, a solar light top and a stand base are options. List price starts at USD 95 for the 230 mm box. ukiosks builds this outdoor brochure holder in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Wick Clear Acrylic Outdoor Brochure Holder with Lid, 230 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop