UniqueKiosk · Shenzhen workshop

Gale Cream White Single Sided Gondola Unit, 2200 mm

$620.00

Gondola unit in cream white steel with a perforated back panel, one base shelf and three shelves. Price range: USD 620-1,100, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Single Sided Bay

This gondola unit stands 2200 mm tall and 1200 mm wide against a wall. One deep base shelf runs 520 mm, and three shelves above run 400 mm. A gondola unit built this way uses a wall or a rail behind it, so a shop gains floor space. The base shelf takes the bulk carton and the upper shelves take the jar and the can. A shop sets the top shelf below the sight line of a customer. The back panel closes the run at both ends. Gondola shelving units list this height.

Perforated Back

The back panel is a perforated steel sheet on a 50 mm hole grid. A gondola unit with a hole panel takes a hook, a divider or a small shelf clip. The panel adds stiffness, so the bay does not sway when loaded. Uprights run 30 x 60 mm with a slot pitch at 25 mm. Shelf brackets lock into the slot with a key. A staff member moves a shelf in about a minute, with no tool.

Load and Finish

Each shelf holds 70 kg across the span for this gondola unit. The boards are 0.7 mm steel with a stiffener rib under the front edge. A cream white powder coat covers the frame and the shelf face. A gondola unit in this finish reads warm under a shop lamp and hides a dust line. The base deck takes a kick plate, so a trolley bump does not dent the front. Levelling feet sit under the upright. Our store display shelves use the same rib.

Specification Detail
Height 2200 mm
Width 1200 mm
Base Depth 520 mm
Shelf Depth 400 mm
Shelf Load 70 kg
Upright 30 x 60 mm steel
Finish Cream white

Shop Use

A grocery sets this gondola unit along a wall for dry goods. A pharmacy runs a bay for care products by brand. A convenience store keeps the base shelf for bulk packs. A hardware shop loads tools on the lower two shelves. Retail store display racks share this slot pitch. A shop with a narrow room likes the single sided bay, since a customer walks past the wall. A display stand closes the run.

Build Notes

Uprights are roll formed from a galvanised strip, then powder coated. Each back panel clips into the upright slot and locks at the corner. A gondola unit of this build ships flat and joins in about forty minutes with two people. The shelf edge takes a label strip that lifts away for a change. A second bay shares one upright, so a run grows fast. Read our bench notes for the upright detail.

Sizes and Price

Height runs at 1800, 2000 or 2200 mm for this gondola unit. Width runs at 900, 1000 or 1200 mm. Shelves come as three or four above the base. The finish comes in cream white, bright white or light grey. A peg panel, a divider set and an end cap are options. A shop can also order a double sided version. List price starts at USD 620 for the 1200 mm bay. ukiosks builds this gondola unit in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Gale Cream White Single Sided Gondola Unit, 2200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop