UniqueKiosk · Shenzhen workshop
Flint White Linen Male Torso Form on Metal Base
$95.00
Torso form in white linen over hard foam, with a neck cap and a black metal base. Price range: USD 95-180, set by size and cover.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Form Shape
This torso form runs from the neck to the hip line with no arms. A shop sets a shirt on it and the shoulder line reads clean. A torso form at this cut suits a knit, a shirt or a jacket. The chest runs 96 cm and the waist runs 78 cm. The hip line stops short, so a trouser hangs from the waist. A neck cap takes a collar at 38 cm. Retail mannequins list this size.
Linen Cover
The body is hard foam with a white linen cover over it. A linen face takes a pin, so a shop can mark a hem line. A torso form in linen holds a shirt flat without a shine. The cover is stitched down the centre and at the shoulder seam. A shop brushes the linen with a soft cloth and no water. The white stays clean under a window lamp for a full season. A spare cover is available as a part. Our half body mannequins use the same collar cap.
Stem and Base
A slim steel stem holds this torso form at 200 mm above the base plate. The plate runs 300 x 220 mm in black powder coat. A torso form on this base stands square on a tile floor. The stem takes one screw at the hip socket, so a shop sets the height fast. Two felt pads protect a wood floor. The base sits low, so a shirt hem falls over it. Display stands use this plate.
| Specification | Detail |
|---|---|
| Chest | 96 cm |
| Waist | 78 cm |
| Cover | White linen |
| Core | Hard foam |
| Stem Height | 200 mm |
| Base | 300 x 220 mm steel |
| Weight | 1.8 kg |
Shop Use
Menswear shops set this torso form on a shelf or a low table. A knit brand uses three forms by colour along a wall. A tailor keeps one at the fitting desk. A uniform shop shows a work shirt on each form. Retail display tables pair with this base size. A shop with a glass top likes the felt pad, since the plate does not scratch.
Build Notes
The foam core is cut on a mould and shaped by hand at the shoulder. The linen cover is stitched, then fitted wet and dried on the form. A torso form of this build weighs 1.8 kg with the stem and base. The collar ring is a spun metal cap with a felt liner. Each unit is checked for a level base and a straight shoulder before packing. Read our bench notes for the cover detail.
Sizes and Price
Chest size runs at 92, 96 or 102 cm for this torso form. Cover runs at white linen, black linen or jersey. A hanging hook, a taller stem and a heavier plate are options. A shop can also order a female form on the same base. A full body version is available in the same cover. List price starts at USD 95 for the 96 cm unit. ukiosks builds this torso form in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.