UniqueKiosk · Shenzhen workshop
Quarto Clear Acrylic Countertop Brochure Holder, Two Pocket
$89.00
Brochure holder in clear acrylic with two upright pockets and a slanted back. Price range: USD 89-160, set by pocket count and size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Two Pocket Body
This brochure holder carries two upright pockets side by side. Each pocket takes an A5 leaflet or a tri-fold sheet. The front rim dips at 60 mm, so a customer pulls a sheet without a pinch. A brochure holder of this layout suits a counter with limited depth. The back panel runs 40 mm taller than the front, which keeps a sheet upright. Clear acrylic shows the print from both sides. Brochure holders list this pocket layout.
Acrylic Build
The body is 3 mm cast acrylic with a polished edge. A cast sheet takes a fold and a cut without a cloud line. A brochure holder in this grade stays clear under a window light. The pockets are joined with an acrylic cement, so no screw shows on the face. The base is one 8 mm sheet and carries the whole unit. Each edge is flame polished by hand before packing. Our store display shelves use the same cast sheet.
Counter Fit
A slanted back sends the printed face toward a standing reader. A brochure holder at 170 mm tall sits below a lamp arm and does not block a till. The base runs 160 mm wide, which fits a narrow reception top. A shop sets one at a till, one at a door and one on a consultation desk. The unit takes a wipe with a damp cloth and no polish. Display stands use this same base thickness.
| Specification | Detail |
|---|---|
| Pocket Count | Two |
| Sheet Size | A5, 148 x 210 mm |
| Height | 170 mm |
| Base Width | 160 mm |
| Material | 3 mm cast acrylic |
| Edge | Polished clear |
| Weight | 0.9 kg |
Where It Works
Clinics keep this brochure holder beside a booking screen. Hotels put a spa menu in one pocket and a city map in the other. A car showroom sets a spec sheet at each model. A jewellery counter uses it for care cards. Retail display tables show this pairing. A shop with a busy till likes the twin pocket, since two print pieces stay apart.
Care and Print
A sheet at 148 x 210 mm sits well in this brochure holder. Thicker card at 300 gsm still slides in and out. A shop prints a fresh set each season and swaps them in seconds. The acrylic cleans with water and a soft cloth, and alcohol lifts a sticky mark. Avoid a paper towel, since the fibre dulls the face. A spare pocket insert is available if a rim cracks. Read our bench notes for the cut detail.
Sizes and Price
Pocket count runs at one, two or three for this brochure holder. Sheet size runs at A5, A4 or DL. Height runs at 170 mm or 240 mm. The edge comes polished clear or frosted. A wall bracket and a business card pocket are options. A shop can also order a custom print on a small front plate. List price starts at USD 89 for the two pocket unit. ukiosks builds this brochure holder in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.