UniqueKiosk · Shenzhen workshop

Bramble Navy Pedestal Display Case with Glass Hood

$690.00

Navy pedestal display case with a white deck, clear glass hood and three lockable drawers. Price range: USD 690-980, set by size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Compact Case

This pedestal display case stands 900 mm tall on a 400 mm wide base. The glass hood adds 250 mm above a white deck. A shop places the case on a counter end or beside a till. A pedestal display case at this height lets a customer look straight into the hood. Three drawers sit under the deck and keep stock near the sale. The case holds a watch set and a ring tray at the same time. Countertop displays list this deck size.

Drawer Block

Three drawers fill the body of this pedestal display case. Each drawer runs 340 mm wide and 300 mm deep with a spacer tray option. A brass pull sits at the centre of the face. The top drawer takes a cash tray, and the lower two hold boxed stock. A key lock runs on the top drawer and covers the block. The face panels carry a navy gloss finish. Display cases use this drawer depth. A shop can also order a felt insert for a ring row.

Glass Hood

The hood uses 6 mm tempered glass with a clear polished edge. A slim frame holds the four panels and caps the top. A shop lifts the hood off for a fast reset before opening. A pedestal display case with a bonded corner keeps the glass line straight. The deck under the hood is a white laminate and reads bright under shop light. A soft mat sits on the deck to stop a tray sliding. Jewellery displays share this hood height.

Build Notes

The body is 18 mm plywood with a gloss lacquer over a primer. Drawer boxes run on steel ball slides. The hood frame is aluminium with a black anodised coat. A navy gloss finish shows a mark, so each panel is wiped and checked before packing. A pedestal display case of this build carries 10 kg on the deck. The case stays square within 1 mm on a counter. A shop can fit a leveller pad under each corner for a level deck. Read our factory notes for the build detail.

Shop Use

Watch dealers use this pedestal display case on a counter end and keep boxes inside. A jeweller sets a ring row on the deck and price cards on a small stand. A pawn shop uses the case for a single high value piece overnight. A hotel shop sets the case near the desk and the lobby reads curated. Store fixtures pair with this case height. A shop with a narrow counter likes the small footprint, since the case takes little space.

Order and Price

Deck size runs at 400 mm, 450 mm or 500 mm square. Height runs at 900 mm or 1000 mm. Hood height runs at 250 mm or 300 mm. Drawer count runs from two to four for this pedestal display case. The finish comes in navy gloss, black or white. A lock, an LED puck light and a felt insert are options. List price starts at USD 690 for the 400 mm unit. ukiosks builds this pedestal display case in Shenzhen to order, so send your spec through contact us.

Specification Detail
Deck Size 400 x 400 mm
Height 900 mm
Hood 250 mm, 6 mm tempered glass
Drawers 3 with brass pulls
Finish Navy gloss lacquer
Lock Top drawer, one key
Load 10 kg on the deck

Reviews

There are no reviews yet.

Be the first to review “Bramble Navy Pedestal Display Case with Glass Hood”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop