UniqueKiosk · Shenzhen workshop
Canted Corner Case with Sliding Glass Doors
$1,480.00
Wedge shaped corner display case with a black frame, two sliding glass doors and four stepped shelves. Price range: USD 1,480-2,050, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Wedge Outline
A wedge outline lets this display case fit a corner without a gap. The body runs 1200 mm wide and 1800 mm tall at the high side. A black frame carries the slope and two glass sliding doors. A shop sets the case in a corner bay and the slope follows the wall. Glass for this display case runs 6 mm thick on the front and both sides. Display cases list this wedge size. A brass pin holds each shelf.
Stepped Shelves
Four glass shelves step down inside this display case. The pitch runs 350 mm at the low end and 420 mm at the tall end. A shop sets a bag on the wide shelf and a wallet on the narrow one. Each shelf sits on a pin, so the pitch moves on a 40 mm slot. Display shelves use this step layout. A shop can add a lit rail under the top shelf.
Sliding Door Front
Two sliding glass doors close the front of this display case. Each door runs on a small track and takes a lock block at the base of the case. A shop opens one door and reaches every shelf without moving the case. The track also keeps the door line tight, so dust stays out. Retail displays fixtures fit the same corner bay. A wide bay also takes a low tray under the door line.
Styled Corner
A styled corner turns this display case into a working wall. Handbags sit on the wide shelves and leather goods sit on the low deck. A shop pairs the case with a lit bay beside it and the corner reads full. Display shelves carry the folded stock. A pair of sunglasses sits on the low shelf, so the shopper sees the small goods first. A shelf card also sits beside a bag, so the price reads at a glance.
Load and Care
Each shelf of this display case holds 15 kg and the base holds 40 kg. Keep a heavy bag on the low shelf, since the tall pane takes a point load near the rail. The case stays plumb within 1 mm when the floor sits level. Wipe the glass with a soft cloth and water only. Dust the frame each month. Check the door track each quarter, since grit slows a slide. Read more about our bench on our wedge build.
Size Options
Width runs at 1000 mm or 1200 mm on request. Height runs at 1800 mm or 2100 mm. A shop can order a mirrored back or a five shelf set. The frame also comes in satin brass in place of black. List price starts at USD 1,480 for the 1200 mm case. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.
| Specification | Detail |
|---|---|
| Width | 1200 mm |
| Height | 1800 mm |
| Depth | 500 mm |
| Shelves | 4 stepped glass |
| Doors | 2 sliding, lockable |
| Frame | Black lacquer |
| Load | 15 kg shelf, 40 kg base |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.