UniqueKiosk · Shenzhen workshop
Cube Glass Vitrine on Three Drawer Column Base
$460.00
Pedestal display case with a clear glass cube hood and a three drawer column base. Price range: USD 460-720, set by hood size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Glass Cube Hood
A clear glass cube forms the hood of this display case. The cube runs 400 mm wide and 350 mm deep. It takes a 6 mm tempered glass top and four clear sides. A shop sets one high value item inside. Light then enters from every side. The hood of this display case also lifts off for a quick swap of the stock. Display cases list this hood size. A small cube also keeps one item in focus on a busy floor.
Three Drawer Column
Three drawers stack under the hood of this display case in a narrow column. Each drawer runs 400 mm wide on a ball bearing slide and takes a 60 mm depth. A shop keeps the certificates, the spare straps and the cleaning cloth inside. The drawer face of this display case also takes a small brass knob for a pull. A shallow drawer also keeps a flat item from sliding. Countertop displays share this drawer depth.
Pedestal Height
The full unit stands at 1100 mm, so the hood top sits at eye level on a shop floor. A shop sets the case beside a fitting chair and the buyer reads the item without bending. The column also carries the weight low, so the case cannot tip. A short plinth under the base keeps the drawer clear of a wet floor. Retail displays fixtures use this height.
Shop Use
This display case fits a jewelry counter, a watch desk or a gallery plinth line. The 400 x 400 mm footprint lets four units sit in a row without crowding. A shop sets the row 700 mm apart and keeps the aisle at 900 mm. The black column of this display case also reads quiet beside a pale stone floor. A short hood also keeps the row height even. Display racks fit the same line.
Load and Care
The glass hood of this display case holds 12 kg on the top plate. The inner floor takes 8 kg. Keep a heavy bronze on the base plate. The glass top is not a load surface. The hood stays level within 1 mm when the column stands square. Wipe the glass with a soft cloth and water only, and keep the drawer slides dry. Read more about our bench on our pedestal builds.
Size Options
Hood size runs at 400 x 400 mm or 500 x 500 mm on request. Total height runs at 1100 mm or 1250 mm. A shop can order two drawers in place of three, or a lock on the top drawer. The column comes in matte black, satin white or walnut. List price starts at USD 460 for the three drawer unit. ukiosks builds this display case in Shenzhen to order, so send your drawing through contact us.
| Specification | Detail |
|---|---|
| Hood | 400 x 400 x 350 mm |
| Total height | 1100 mm |
| Drawers | 3, ball bearing |
| Glass | 6 mm tempered |
| Column | Black laminate |
| Load | 12 kg top, 8 kg floor |
| Knob | Brass, per drawer |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.