UniqueKiosk · Shenzhen workshop

Rivet Steel Display Rack with Seven Narrow Tiers

$362.00

Boltless rivet display rack in grey steel with seven narrow shelf tiers and back braces. Price range: USD 362-520, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Rivet Frame Build

A rivet frame carries this display rack, so no bolt or tool is needed on site. Each beam tab drops into an upright hole and locks on a rivet. A shop builds the unit in about 20 minutes with one person. The rivet joint also stays tight after a move, since the tab seats in the hole. This display rack suits a store that changes layout often. Display racks list this rivet joint.

rivet tier display rack

Seven Narrow Tiers

Seven narrow tiers stack on this display rack, each 300 mm apart. The close spacing suits small packs, tins or boxed parts. A shop sets one sku per tier and reads the range down the face. The base tier of this display rack sits at floor level, so bulk stock loads without a lift truck. Retail displays fixtures share this tier pitch.

display rack tiers front

Back Cross Braces

A pair of cross braces ties the back of this display rack. The braces run corner to corner and stop the frame from swaying under load. A shop keeps the rack in a stock room and moves it with a pallet truck. The brace arms of this display rack also stiffen the unit on an uneven floor. Display shelves share this brace set.

display rack tiers side

Shop Use

The display rack suits a stock room, a back store or a small parts aisle. Seven tiers show a deep range in one narrow footprint. A shop sets the unit against a wall and keeps 700 mm clear in front. The grey finish of this display rack reads neutral, so the packs stay the focus. Countertop displays fit the same aisle.

Load And Care

Each tier holds 80 kg on this display rack, and the base tier holds 120 kg. Keep the heavy parts on the low tiers, since the rivet joint bears more load near the base. A loaded rack stays level within 2 mm across the floor plate. Check the rivet tabs after a month, since a loose tab lets a tier drop. Wipe the plates and keep the uprights dry. Read more about our bench on our rivet frames.

display rack rivet joint

Size Options

Width runs from 900 mm to 1200 mm on request. Height runs at 1800 mm or 2100 mm. A shop can order five tiers instead of seven for taller stock. The plates come in grey or a galvanised finish. A castor set can replace the base feet. List price starts at USD 362 for the 900 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your tier plan through contact us.

Specification Detail
Width 900 mm
Height 1950 mm
Depth 450 mm
Tiers 7 at 300 mm pitch
Frame Boltless rivet
Load 80 kg tier, 120 kg base
Finish Matte grey steel

Reviews

There are no reviews yet.

Be the first to review “Rivet Steel Display Rack with Seven Narrow Tiers”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop