UniqueKiosk · Shenzhen workshop

Stainless Steel Display Rack with Brushed Back Panel

$936.00

Wall mounted stainless steel display rack with a brushed back panel and four shelf plates. Price range: USD 936-1480, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Brushed Panel Face

A brushed stainless panel closes the back of this display rack. The grain runs vertical, so a light streak reads as a clean line. A shop uses the panel as a mirror wall behind a perfume or watch row. The panel also hides a plaster wall and keeps the unit sealed at the top edge. This display rack ships as one piece with the cheeks already welded on. Display racks list this panel grain.

stainless display rack

Four Plate Edges

Four plates run across this display rack, and each plate carries a thin edge lip. The lip stops a round bottle from rolling off the row. A shop sets the plates at 200 mm spacing for small goods and wider for tall bottles. The plates bolt to the back panel with two screws each. Display shelves share this plate lip.

display rack plates front

Wall Mount Build

A wall bracket set carries this display rack, so the floor stays clear. The unit runs 300 mm deep and takes a 40 kg load per plate. A shop mounts the rack above a low unit and gains a second selling level. The back panel takes the bracket rail, so the plates keep their line. Wall mount fixtures list this bracket set.

display rack panel side

Shop Use

The display rack suits a cosmetics bar, a watch counter or a hotel pantry. Stainless reads clean and takes a wipe, so a shop uses it in a wet zone. A shop mounts the unit at 900 mm from the floor and keeps 600 mm clear below. The brushed face also hides fingerprints better than a mirror finish. Retail displays fixtures fit the same bar.

Load And Care

Each plate holds 40 kg on this display rack, and the panel takes the full wall load. Keep the heavy stock on the low plate, since the bracket rail sits behind the top plate. A mounted unit stays level within 2 mm across the top edge. Check the wall bolts after a month, since a loose bolt lets the panel bow. Wipe the panel along the grain and keep it dry. Read more about our bench on our steel panels.

display rack plate edge

Size Options

Width runs from 1200 mm to 1800 mm on request. Height runs at 1200 mm or 1500 mm. A shop can order a glass plate in place of the steel on the top row. The panel comes in brushed, mirror or a black powder coat. A light bar can be added under each plate. List price starts at USD 936 for the 1200 mm unit. ukiosks builds this display rack in Shenzhen to order, so send your wall size through contact us.

Specification Detail
Width 1200 mm
Height 1400 mm
Depth 300 mm
Plates 4 with edge lip
Panel Brushed stainless
Load 40 kg plate
Finish Brushed stainless steel

Reviews

There are no reviews yet.

Be the first to review “Stainless Steel Display Rack with Brushed Back Panel”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop