UniqueKiosk · Shenzhen workshop
Aisle Double Sided Clothing Rack with Top Shelf
$448.00
Double sided island clothing rack with two rails, a top shelf and a wide plate base. Price range: USD 448-620, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Two Rails
Two hanging rails run on this clothing rack, one on each side of a central column. Each rail sits at 1600 mm, so a shopper walks a full loop and sees two stock lines. A shop uses the island to split a floor into two zones. The rails also carry a clip sign on each face. Staff load both sides before the store opens. Display racks list this island frame.
Top Shelf
A wide plate closes the top of this clothing rack at 1750 mm. The plate runs 1100 mm long and 500 mm wide, so a box or a folded pile sits flat. A shop sets stock boxes above the rails and keeps the floor clear. The plate also stops light from falling on the stock below. Retail displays fixtures share this top plate.
Plate Island Base
One wide plate carries this clothing rack at the floor. The plate runs 1100 mm long and 600 mm deep, so the island stands without a wall strap. A shopper can pull a coat from either rail without a tip. The base also holds a basket at each end. Staff slide the island for a floor reset. Clothing racks list this island base.
Shop Placement
The clothing rack suits an open plan shop, a mall bay or a showroom aisle. The island shape breaks a long wall into two smaller zones. A shop sets the unit mid floor with 900 mm clear on each side. The double face of this clothing rack also doubles the stock in one floor footprint. Countertop displays fit the same aisle.
Load And Care
Each rail holds 60 kg and the top plate 30 kg on this clothing rack. Keep heavy coats on the outer posts, since a rail bends at mid span. A loaded island stays level within 2 mm across the base. Check the rail bracket after a month, since a loose bracket lets a rail dip. Wipe the plate and keep the base clear of boxes. Read more about our bench on our island frames.
Size Options
Width runs from 1000 mm to 1500 mm on request. Height runs at 1700 mm or 1850 mm. A shop can add a third rail for a three way island. The top plate can also swap for a marble board. The finish also comes in chalk white or oxide grey. List price starts at USD 448 for the 1100 mm island. ukiosks builds this clothing rack in Shenzhen to order, so send your floor plan through contact us.
| Specification | Detail |
|---|---|
| Length | 1100 mm |
| Height | 1750 mm |
| Frame | 30 mm square steel |
| Rails | 2, opposite faces |
| Top plate | 1100 x 500 mm |
| Load | 60 kg rail, 30 kg plate |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.