UniqueKiosk · Shenzhen workshop

Truss Thin Tube A-Frame Clothing Rail

$232.00

Slim A-frame clothing rail in 25 mm round tube with a low cross bar. Price range: USD 232-360, set by span.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Thin Tube

This clothing rack uses 25 mm round tube on every member. A thin section keeps the frame light, so one staff member moves the unit alone. The tube also leaves the stock as the main shape on the floor. A shop hangs fifteen to twenty light pieces on one line. The frame reads as a wire outline, not as furniture. A denim bar pairs it with a heavier rail nearby. Display racks list this thin tube.

slim a-frame clothing rail

A Frame Sides

Two A shaped sides carry this clothing rack. Each side leans back 100 mm at the foot, so the frame stands without a wall strap. The narrow top keeps the rail close to the post, and the wide base keeps the unit steady. A shopper can pull a coat without lifting the frame. The feet carry small nylon pads to protect a tile floor. Retail displays fixtures share this A side.

clothing rail front span

Low Cross Bar

A low cross bar ties the two A frames 60 mm above the floor on this clothing rack. The bar sets the span and stops the legs from splaying. It also gives the frame a place for a stock box or a folded pile. A shop keeps the bar clear when the rail carries long dresses. Staff lift one side and walk the unit for a reset. Clothing racks list this cross bar.

clothing rail thin side

Small Footprint

The clothing rack suits a narrow bay, a pop up stand or a studio sample line. Depth runs 400 mm at the foot, so the unit fits a 500 mm aisle. A shop sets two units in a row for a 2000 mm run. The open frame of this clothing rack keeps the wall display visible. Countertop displays fit the same aisle.

Load And Care

The rail holds 60 kg when weight spreads along the span. Keep knitwear near a post, since the thin tube bends at mid rail. A loaded clothing rack stays level within 2 mm across the four feet. Check the cross bar set screws after a month, since a loose screw lets a leg walk. Wipe the tube with a soft cloth to keep the coat smooth. Read more about our bench on our tube bending.

clothing rail top weld

Span Options

Span runs from 900 mm to 1400 mm on request. Height runs at 1450 mm or 1600 mm. A shop can add a second rail for a two tier line. The frame also comes with a shelf board laid on the cross bar. The finish also comes in warm white or soft grey. List price starts at USD 232 for the 1100 mm frame. ukiosks builds this clothing rack in Shenzhen to your sizes, so send your plan through contact us.

Specification Detail
Span 1100 mm
Height 1550 mm
Tube 25 mm round steel
Sides A shape, 2 per unit
Cross bar At 60 mm height
Load 60 kg
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Truss Thin Tube A-Frame Clothing Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop