UniqueKiosk · Shenzhen workshop

Bracket Boutique Clothing Rack with Wood Rail

$96.00

Wall mounted clothing rack with a 1200 mm walnut rail on two black steel brackets. Price range: USD 96-150, set by rail length and bracket finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wall Rail

This clothing rack mounts to a wall and leaves the floor completely free. The rail is a round walnut rod of 1200 mm, held at both ends by steel brackets. The rod measures 30 mm thick, which takes wood hangers without a crease. A boutique gains a rail in a narrow stockroom or behind a counter. The frame stands 260 mm off the wall, so hangers clear a shelf above. Display racks use the same wall rail idea.

bracket clothing rack wood rail

Brackets

Each bracket is a black steel plate with a short arm and a cup that holds the rod. Two screws fix the plate to a wall stud or a solid panel. The arm gives 260 mm of projection, so a jacket hangs clear of the plaster. A small clip under the cup stops the rod from rolling. A finished clothing rack weighs about 2.2 kg before load. Retail displays fixtures share this bracket detail.

clothing rack wall rail front

Small Store Use

The rail works in a stockroom, a fitting area, a hotel wardrobe or a market stall wall. A shop hangs a short capsule line above a bench. Staff keep the floor clear for boxes and a trolley. A studio uses the rail for a shoot wardrobe. The wall mount suits a rented unit where floor fixtures must leave. Countertop displays fit the same projection.

clothing rack bracket side

Load And Mount

The rail carries about 40 kg when weight spreads along the rod. Fix the brackets into studs or a solid panel, because drywall alone will not hold a full rail. Keep heavy coats near a bracket, since the rod bends at the middle. A loaded clothing rack stays level within 2 mm along the rail. Check the bracket screws after a season of use. Clothing racks list the same fixing rule.

Clean And Fit

Wipe the walnut rod with a dry cloth and clean the brackets with mild soap. An oiled clothing rack keeps a warm tone under shop light. Keep water off the rod end, since moisture dulls the finish. A wall clothing rack also needs a check of the bracket plate each season. Read more about our bench and the finish we use.

clothing rack bracket clamp

Length And Finish

Rail length runs from 800 mm to 1800 mm on request. Projection runs from 200 mm to 300 mm. Walnut is the standard rod, with oak or black steel as an option. The clothing rack also takes a second rail at a lower height. List price starts at USD 96 for the 1200 mm unit. ukiosks builds this clothing rack in Shenzhen to your wall length, so send your plan through contact us.

Specification Detail
Rail 30 mm walnut rod
Length 1200 mm
Brackets 2 black steel
Projection 260 mm
Load 40 kg
Weight 2.2 kg
Mounting Wall fixings, 2 screws per bracket

Reviews

There are no reviews yet.

Be the first to review “Bracket Boutique Clothing Rack with Wood Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop