UniqueKiosk · Shenzhen workshop

Flat Acrylic Slab Risers Set of 4

$72.00

Four flat clear acrylic slab risers, 127 mm square and 25 mm thick, to build a low lift. Price range: USD 72-120, set by slab size and thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Stack For Lift

Four slabs stack into one lift on this acrylic riser. Each slab measures 127 mm square at 25 mm thick. Two slabs give a 50 mm lift, and four give 100 mm. A shop sets one slab under a tray for a small raise. A jeweller stacks three for a ring row at eye level. A slab spreads the load across a full tray. The set mixes with a cube body. This acrylic riser gives a flat field with no rim. Our acrylic displays share the slab line.

flat acrylic slab risers

Layered Edge Look

Stacked slabs show a layered edge on this acrylic riser. Each 25 mm rim reads as one clear line. A black slab between clear slabs adds a dark band. A shop sets the stack on a glass counter and the edge reads clean. The top face stays flat, so a card sits level. A slab of this size weighs about 400 g. Four slabs weigh about 1.6 kg. This acrylic riser holds a tray with no bend under load.

slab risers front view

Cut And Polish

A saw cuts each slab of this acrylic riser from cast sheet of 25 mm. A mill flattens the faces, then a diamond polish clears them. A 1 mm chamfer protects each corner. A slab passes a flat test on a steel plate. A flame run clears a small mark on the top face. A cloth wipe keeps a print off the surface. This acrylic riser ships as four slabs in one carton. Our countertop displays use the same plate stock.

slab riser side view

Position Anywhere

A flat slab does not block a view, so this acrylic riser suits a low case. A ring tray sits on one slab at the front. A watch roll sits on two slabs. A museum uses one slab under a small bowl. A cosmetics bar lifts a tester tube. A bakery sets a plate on the stack. A gallery lifts a photo card. A slab moves alone when a layout changes. This acrylic riser fits a 300 mm tray. A countertop easel shares the plate.

Finish And Sets

Clear slab keeps a tray tone visible under the item. A black slab gives this acrylic riser a shadow band. A white slab fits a light shelf. A frosted face cut a lamp glare. We can print a size mark on one edge. A set of eight slabs fills a long tray. Each slab packs in foam inside a carton. A spare slab ships with a bulk order. This acrylic riser pairs with a velvet tray run under it. Our display racks list the plate sets.

slab edge detail

Price And Custom Build

List price starts at USD 72 for this four slab acrylic riser set in clear 25 mm sheet. An eight slab set lands near USD 130. A slab stack sets the lift in 25 mm steps. A flat top face keeps a tray level. A square edge lines up with a case grid. This acrylic riser pairs with retail displays fixtures and retail sign holders. ukiosks builds this acrylic riser to order in Shenzhen. We can reset slab size, thickness, slab count and colour. Send your lift height and we return drawings and a quote.

Specification Detail
Set content 4 slabs, 127 mm square
Thickness 25 mm each, 100 mm total
Material Solid cast acrylic, clear
Finish Diamond polished faces
Weight About 1.6 kg per set
Colour Clear, black or white

Reviews

There are no reviews yet.

Be the first to review “Flat Acrylic Slab Risers Set of 4”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop