UniqueKiosk · Shenzhen workshop

Eight Pocket Acrylic Literature Rack

$190.00

Clear acrylic literature rack with eight upright pockets in two tiers and a slanted back, 480 mm wide. Price range: USD 190-330, set by pocket count and width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Eight Upright Pockets

Four upright pockets sit in each tier of this brochure holder. Two tiers give eight slots in one body. Each pocket takes a sheet up to 210 x 297 mm, so an A4 leaflet fits. A divider runs between pockets from the floor to the top edge. The back leans about 15 degrees, so the sheets stay upright. The rack runs 480 mm wide and 300 mm tall. This brochure holder carries a full document set in one footprint.

eight pocket literature rack

Tier Stepping

The lower tier of this brochure holder steps forward of the upper tier. That step puts the lower lips clear of the top sheets. A reader can pull from either row without lifting the top cover. Each tier carries about 25 sheets, so a full load runs near 200. A label strip sits on the divider face for a title card. The front lip stops a thin sheet from sliding out. Our literature displays use the same step depth.

literature rack front view

Panel Build

Clear acrylic of 4 mm builds this brochure holder. Each tier floor bends from one sheet, so the lip and floor share a joint-free face. Dividers weld to the tier floor and the back panel, which keeps the pockets square. A flame polish clears the cut rim. Side panels close the ends and carry the load. The whole unit weighs about 3.5 kg empty. A felt pad under each base corner protects a counter. This brochure holder keeps its shape under a full set.

literature rack side view

Print And Header

A header panel on the top tier takes a printed line on this brochure holder. We print reverse, so the face stays clear. A logo above each pocket marks a department. A colour band on the divider face separates two languages. A campaign card fills one pocket with a single message. A screen print suits a long run, and a label suits a short one. This brochure holder ships clear. A retail sign holder takes a second head line.

pocket divider detail

Counter And Lobby Fit

A 480 mm width fits a service desk, a lobby plinth and a trade show table. Eight pockets cover a price list, a plan, a warranty and a leaflet. A reader scans four columns before choosing. A clerk swaps one stack without moving the rack. A clear body lets the counter surface show under it. Two units on one desk split a long list and a short one. Our countertop displays and display racks cover other formats.

Price And Custom Build

List price starts at USD 190 for this eight pocket brochure holder in clear acrylic. A twelve pocket version at 700 mm width lands near USD 290. An eight pocket brochure holder puts a full document set in a desk footprint. An upright divider keeps each title apart. A slanted back keeps a sheet from folding over. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset pocket count, sheet format, divider pitch and print layout. Send your document set and we return drawings and a quote.

Specification Detail
Pockets Eight, four per tier
Sheet size Up to 210 x 297 mm, A4
Overall size 480 x 200 x 300 mm
Pocket capacity About 25 sheets each
Material 4 mm cast acrylic, clear
Back slant About 15 degrees
Weight About 3.5 kg empty

Reviews

There are no reviews yet.

Be the first to review “Eight Pocket Acrylic Literature Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop