UniqueKiosk · Shenzhen workshop
Shelf Style Acrylic Literature Rack
$180.00
Clear acrylic stepped literature rack with four tiers and twelve pockets, 500 mm wide and 400 mm tall. Price range: USD 180-320, set by tier count and width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Stepped Tier Layout
Four slanted tiers step back on this brochure holder, so every row reads from the front. Each tier splits into three pockets with a slim divider. Twelve pockets in total carry twelve different titles. The lower tier runs deepest and holds a thicker stack. The top tier sits at 400 mm, which suits a counter reader. A closed side panel hides the pocket sides. The base plate runs 300 mm deep. This brochure holder replaces a pile of single stands.
Acrylic Build
Clear cast acrylic of 4 mm builds the panels of this brochure holder. Each tier plate bends through heat, so the lip and the floor come from one sheet. Dividers weld to the tier plate with solvent cement. Side panels tie the tiers into one box, which keeps the shape square. The whole unit weighs about 4 kg with sheets inside. A polished edge keeps the sheet clear at a glance. This brochure holder holds its shape under a full load.
Loading And Lookup
Staff load this brochure holder from the top tier down. Each pocket takes about 20 sheets, so a full load runs near 240 sheets. A label line sits under each pocket, which takes a printed card. A reader scans the four rows before choosing a title. A clerk refills one pocket without moving the rack. The front lip stops a sheet from slipping out. Our literature displays use the same tier spacing.
Where It Sits
A counter end, a lobby plinth and a trade show table suit this brochure holder. A 500 mm width fits a standard counter run. The stepped face reads from a standing distance of about one metre. A clear body lets the counter finish show under the rack. A staff member moves the unit with two hands. A spare pocket set covers a new campaign. Our countertop displays and display racks cover other formats.
Print And Signage
A header card can sit on the top tier of this brochure holder. We print on the rear face, so the front stays clear. A pocket label carries a title and a price. A colour block on the side panel marks a language zone. A campaign sheet fills the lower tier with one message. A screen print suits a long run, and a label suits a short one. This brochure holder ships clear. A wall mounted brochure holder takes the same header card.
Price And Custom Build
List price starts at USD 180 for this four tier brochure holder with twelve pockets. A six tier version at 700 mm width lands near USD 290. A stepped brochure holder puts twelve titles in one square metre of counter. A slanted tier keeps each cover in view. A welded divider stops a sheet from crossing pockets. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset tier count, pocket width, divider pitch and print layout. Send your title list and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Tiers | Four slanted tiers |
| Pockets | Twelve, three per tier |
| Overall size | 500 x 300 x 400 mm |
| Pocket capacity | About 20 sheets each |
| Material | 4 mm cast acrylic, clear |
| Edge finish | Flame polished |
| Weight | About 4 kg empty |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.