UniqueKiosk · Shenzhen workshop
Leaflet Acrylic Brochure Holder 8.5×11
$72.00
Large clear acrylic brochure holder for 8.5 x 11 inch sheets, with a stepped pocket lip and side gussets, 275 mm wide. Price range: USD 72-120, set by format and thickness.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Wide Sheet Format
This brochure holder takes a full letter sheet at 8.5 x 11 inch. The pocket runs 275 mm wide, so a two column leaflet sits flat. A stepped lip holds the sheet at the lower edge and leaves the middle clear. A tall back panel stands 180 mm above the pocket line. Two side gussets close the ends, so a sheet cannot fan out. The base plate runs 60 mm deep. This brochure holder shows a full page with no folding.
Side Gusset Construction
Two vertical gussets carry the load on this brochure holder. Each gusset runs from the base plate to the pocket lip at a slight outward angle. That angle keeps the body stable when a shopper pulls a sheet. A solvent cement joint ties each gusset to the front panel. A clear sheet of 4 mm builds all panels, so the structure holds without a frame. The unit weighs about 900 g with no sheet inside. This brochure holder stays level on any counter. A retail sign holder shares the gusset build.
Placement And Reach
A large brochure holder needs a reach zone of about 400 mm. A counter, a plinth or a service desk carries this unit. The face leans back about 10 degrees, so a standing reader sees the full page. A shopper pulls the sheet by the lower corner, where the lip opens. Staff stack about 30 sheets inside without a jam. A clear body lets a printed header read from a distance. Our countertop displays cover a raised version.
Print Options
A printed panel can sit behind this brochure holder, so the rear face carries colour. We reverse print, which keeps the front clear and the text facing out. A logo strip on the base plate marks a sponsor. A full colour card at the top edge runs a campaign headline. A sheet of 8.5 x 11 inch holds a price list or a floor plan. A short run takes a loose insert and a long run takes a screen print. This brochure holder ships clear. A countertop easel carries a short card.
Store And Office Use
A letter size holder suits a floor plan, a service menu and a terms sheet. A furniture showroom, a clinic and a bank desk read well with this size. One unit holds one document, which keeps a desk clean. A wide pocket takes a stapled pack of ten sheets. A clerk swaps the stack in under a minute. A clear panel shows the counter surface under it. Our literature displays cover a multi tier rack.
Price And Custom Build
List price starts at USD 72 for this letter size brochure holder in clear acrylic. A two pocket version with a printed rear panel lands near USD 105. A large brochure holder shows a full page without a fold. A stepped lip lets a reader pull a sheet at the lower corner. A 4 mm sheet holds the body flat under a stack. This brochure holder pairs with acrylic displays and retail displays fixtures. ukiosks builds this brochure holder to order in Shenzhen. We can reset pocket width, gusset angle, sheet thickness and print layout. Send your sheet size and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Sheet format | 8.5 x 11 inch, 216 x 279 mm |
| Overall size | 275 x 60 x 350 mm |
| Material | 4 mm cast acrylic, clear |
| Pocket depth | 45 mm, about 30 sheets |
| Back panel | 180 mm above pocket |
| Base plate | 60 mm deep, two slots |
| Weight | About 900 g |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.