UniqueKiosk · Shenzhen workshop

Wall Mount Acrylic Brochure Holder A5

$58.00

Clear acrylic wall mount brochure holder in A5 format with a slanted pocket and a single hanging hole. Price range: USD 58-95, set by format and sheet thickness.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wall Fixing Method

One round hole in the back panel holds this brochure holder on a wall. The hole takes a screw or a hook of 8 mm. A slight neck at the top of the hole locks the unit when it settles. A clerk drills one point, sets one anchor and hangs the unit in place. No shelf or bracket sits under it. The back panel runs flat, so it sits tight to a plaster wall. This brochure holder suits a fitting room door or a tiled column.

wall mount brochure holder

A5 Pocket Size

The pocket of this brochure holder takes an A5 sheet at 148 x 210 mm. A folded leaflet of A4 size also fits when folded once. The slanted face puts the front cover at a reading angle. A curved lip at the front lets a thumb lift a sheet. The pocket depth runs 30 mm, deep enough for a thin stack. Two small circles at the lower front hold a label or a size note. This brochure holder reads at eye height. A countertop display covers a desk version.

brochure holder front view

Sheet And Finish

Cast acrylic of 3 mm builds the body of this brochure holder. A polished edge removes the saw mark, so light passes without a haze. The front panel bends in one heat form, so the lip has no joint. A clear sheet keeps a printed cover readable from the side. The surface wipes clean with a damp cloth and no solvent. A scratch pad can restore a dull face. Our acrylic displays use the same sheet grade.

brochure holder side view

Print And Label

A logo prints on the back panel of this brochure holder, above the pocket line. We print on the reverse, so the front face stays clear. A vinyl label sits on the lower front between the two small circles. A colour band along the back edge marks a campaign. Print runs one colour or four colours. A short run takes a label, and a large run takes a screen print. This brochure holder ships plain unless a print file comes with the order.

hanging hole detail

Where It Hangs

A clinic, a showroom and a hotel corridor suit this brochure holder. A wall point takes no counter space, which suits a small room. Staff hang one unit beside a door and a second beside a lift. A clear body reads light on a painted wall. A tenant can move the unit in one minute. Our wall mounted brochure holders list the full range. A wall mount fixture carries the same anchor.

Price And Custom Build

List price starts at USD 58 for this A5 brochure holder with a single hanging hole. An A4 version with two holes lands near USD 88. A wall mount brochure holder frees a small counter for other work. A slanted pocket shows the cover at a reading angle. A polished edge keeps the sheet clear under shop light. This brochure holder pairs with literature displays and retail sign holders. ukiosks builds this brochure holder to order in Shenzhen. We can reset sheet format, hole pattern, pocket depth and print layout. Send your wall plan and we return drawings and a quote.

Specification Detail
Sheet format A5, 148 x 210 mm
Overall size 160 x 40 x 235 mm
Material 3 mm cast acrylic, clear
Pocket depth 30 mm
Fixing One 8 mm hanging hole
Edge finish Flame polished
Weight About 320 g

Reviews

There are no reviews yet.

Be the first to review “Wall Mount Acrylic Brochure Holder A5”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop