UniqueKiosk · Shenzhen workshop

Aluminum Wall Mounted Light Box A2 Portrait Frame

$320.00

Wall mounted A2 light box with a slim aluminium frame and an even lit acrylic face, 420 x 594 mm, for posters and promotions. Price range: USD 300-450, set by size and frame finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wall Mount Format

A wall mount keeps a sign off the counter. This light box fixes flat to a wall and shows one face out. The frame depth is 45 mm, so the unit reads as a shallow panel. A back plate carries two keyhole slots for a screw fix. The face sits 6 mm inside the frame edge, so no print edge shows. A portrait shape fits a poster beside a door or at a till. The unit weighs about 3 kg and holds on two screws. retail display fixtures teams fix it at 1500 mm to the centre.

wall mounted A2 light box

A2 Panel Size

An A2 panel gives this light box room for a full poster. The face measures 420 x 594 mm, four times an A4 sheet. A print sits behind a clear acrylic sheet and a diffuser. The light runs from a strip at each long edge, so the centre stays even. Brightness reaches about 1100 lux at the middle of the panel. A price block or a photo reads from 3 m away. The panel can be swapped for a poster change in a season. display cases walls use the same panel size.

A2 light box front view

Aluminium Frame Build

The frame of this light box is a 30 mm aluminium profile with a mitred corner. Each corner is keyed, then checked for a tight joint with no gap. The face sheet is 4 mm acrylic with a polished edge. A back panel closes the box and carries the driver. The profile has a small lip, so the acrylic sits flush and cannot fall out. A brushed finish hides small marks from a delivery trolley. Every countertop cases case gets a similar corner check. This light box ships with clear fitting notes.

A2 light box side view

Power And Fixing

Power for this light box comes from a 12 V driver inside the back panel. A 1.5 m lead runs to a plug, and a longer lead is an option. The driver sits behind the frame, so no box hangs on the wall. Two keyhole slots take a 6 mm screw and a wall plug. A second pair of slots allows a landscape fix. A switch can be added on the lead for a manual day and night setting. Packing is one carton with a corner guard. cash counter walls often run two units. This light box ships with clear fitting notes.

aluminium frame corner detail

Signage Uses

This light box suits a fitting room wall, a store entrance and a lift lobby. An A2 face carries a campaign poster or a size guide. A wall fix leaves the counter clear for stock and a till. The lit face reads in a dim corridor with no extra spot light. Two units side by side cover a double door. A portrait shape fits a narrow pier between two shelves. Many shop fit outs fix one at the entrance. food and drink shops units show a promo board.

Price And Custom Build

List price starts at USD 320 for this A2 wall unit. An A1 face with a deeper frame lands near USD 430. A lit wall panel pulls a shopper toward a promo without a printed board. A slim frame keeps the wall plane flat. A keyhole fix needs two screws and no bracket. ukiosks builds this light box to order in Shenzhen. We can reset panel size, frame colour, lead length and switch type. Send your plan and we return drawings and a quote.

Specification Detail
Face size A2, 420 x 594 mm (custom A3-A1)
Frame 30 mm aluminium, mitred corners
Depth 45 mm overall
Face 4 mm clear acrylic over diffuser
Light Edge LED, about 1100 lux
Power 12 V driver, 1.5 m lead
Fix Two keyhole slots, portrait or landscape

Reviews

There are no reviews yet.

Be the first to review “Aluminum Wall Mounted Light Box A2 Portrait Frame”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop