UniqueKiosk · Shenzhen workshop

Upright Glass Countertop Display Box on Wood Base

$460.00

Upright countertop display case with a full clear glass box on a moulded wood base, 300 x 300 x 500 mm. Price range: USD 300-600, set by size and base timber.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Upright Glass Box

An upright glass box gives tall stock room on a counter. This countertop display case is 300 mm wide, 300 mm deep and 500 mm tall. Glass is 5 mm clear float with a polished edge, held by a thin dark frame line at each corner. The interior is empty, so a vase, a model or a trophy stands full height. The top panel is glass, so light comes in from above. Weight runs near 7 kg. The countertop cases series lists sizes up to 400 mm square.

upright countertop display box

Moulded Wood Base

A moulded wood base carries this countertop display case. The base is 60 mm thick with a stepped profile on all four sides. It is solid timber, stained a mid brown and sealed with a matte clear coat. A 12 mm recess holds the glass, so no edge shows outside. The base also lifts the glass off a counter, so a spill misses the goods. Every countertop display case we build gets a base seal before packing. retail display fixtures crews check the recess depth.

display box front view

Assembly and Packing

Glass panels for this countertop display case arrive as a flat pack. Staff fit the four sides into the base recess, then set the top. A clear silicone bead at each corner keeps dust out. No tools are needed beyond a cloth and a hex key for the frame pins. Packing is one carton with foam corners and a card sleeve for the base. display cases cases ship the same way. Two units stack in one pallet layer. This countertop display case ships with clear fitting notes.

display box side view

Cleaning and Care

A glass box on a counter collects fingerprints fast. This countertop display case wipes clean with a microfiber cloth and a glass spray. The base takes a damp cloth, then a dry one. Avoid solvent on the matte coat, because it dulls the sheen. Lift the top panel once a month for a full clean inside. Corners hold a bead, so water does not sit under the glass. Many cash counter desks keep one cloth in the drawer.

wood base moulding detail

Where It Sits

This countertop display case suits a florist, a model shop and a hotel reception. A 300 mm footprint fits a narrow counter with a till beside it. Height at 500 mm keeps a tall piece inside a standing shopper view. The glass top lets daylight reach the goods in a window bay. A small LED puck can sit on the base recess if a shop needs more light. The shop fit outs package adds a card stand. food and drink shops tills use the same box.

Price and Custom Build

A clear upright box protects a tall piece without a cabinet frame. A moulded timber base gives the glass a firm seat and a clean edge. Five millimetre glass keeps the cost down and the weight low. List price starts at USD 460 for the 300 mm unit. A 400 mm build with a solid oak base lands near USD 610. ukiosks builds this countertop display case to order in Shenzhen. We can reset height, base timber, frame colour and glass thickness. Send your plan and we return drawings and a quote.

Specification Detail
Overall size 300 x 300 x 500 mm (custom 250-400 mm)
Glass 5 mm clear float, polished edge
Base Solid timber, 60 mm moulded profile
Base finish Mid brown stain, matte clear coat
Interior Open, no shelf
Weight About 7 kg
Packing One carton with foam corners

Reviews

There are no reviews yet.

Be the first to review “Upright Glass Countertop Display Box on Wood Base”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop