UniqueKiosk · Shenzhen workshop

Wood Base Countertop Glass Showcase With Key Lock

$380.00

Countertop display case with a clear glass box on a light wood base, a brass key lock and an open front, 600 x 350 x 300 mm. Price range: USD 300-600, set by size and base finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass on Wood Base

A clear glass box sits on a wood base in this countertop display case. The base is 600 mm wide, 350 mm deep and 80 mm tall. It is 18 mm board with a light oak laminate face and a plain silver edge band. Glass panels are 5 mm, joined at the corners with a clear silicone bead. The top panel rests on the sides, so nothing is cut away. A brass key lock sits at the front centre. Total height is 300 mm. The countertop cases range adds a 900 mm version.

wood base countertop showcase

Lock and Access

This countertop display case closes with a glass front door on two hinges. The brass lock turns a cam into the base rail, so the door holds tight. Two keys ship with each unit. Staff open the front to restock and lock it again at closing. Inside, the deck is bare wood, so a felt pad or tray sits flat. There is no shelf in this model. Every countertop display case we build gets a lock test before packing. display cases cases use the same cam lock.

countertop showcase front view

Base Build

The base of this countertop display case carries the glass and the lock. Board panels are cut, edged and laminated in one run. Corners are glued and pinned, then sanded flat. A 10 mm silver band wraps the top edge, so glass sits level. Feet are four small pads, so the base does not scratch a counter top. The laminate takes a wet cloth without a mark. retail display fixtures crews fit the band before glass. This countertop display case ships with clear fitting notes.

countertop showcase side view

Glass and Finish

Glass for this countertop display case is cut and polished as a matched set. Panels are 5 mm clear float with a flat polish on all edges. Hinges are brass plated and screw into the base, not the glass. A silicone bead runs at each corner to stop dust. The top panel is loose, so a staff member lifts it off for a full clean. Packing is one carton with foam corners. cash counter counters often order two for a paired run.

brass key lock detail

Counter Placement

This countertop display case suits a watch bar, a hotel desk and a small jeweller. A 600 mm footprint leaves space for a tray and a card reader. Height at 300 mm keeps the goods below a standing shopper eye line, so the glass top reads first. The wood base ties to a timber counter. Locking the front covers stock after hours. shop fit outs crews set one at each till. The food and drink shops package adds a second case for cards.

Price and Custom Build

A wood base takes the glass weight and gives a lock a place to sit. Clear panels keep the goods visible from three sides. A brass lock covers a small stock after closing. List price starts at USD 380 for the 600 mm unit. A 900 mm build with a felt deck lands near USD 520. ukiosks builds this countertop display case to order in Shenzhen. We can reset length, base tone, glass height and lock type. Send your plan and we return drawings and a quote.

Specification Detail
Overall size 600 x 350 x 300 mm (custom 400-900 mm)
Material 5 mm clear glass, 18 mm wood base
Base finish Light oak laminate with silver band
Access Hinged glass front with brass key lock
Deck Bare wood deck, no shelf
Feet Four rubber pads
Packing One carton, about 14 kg

Reviews

There are no reviews yet.

Be the first to review “Wood Base Countertop Glass Showcase With Key Lock”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop