UniqueKiosk · Shenzhen workshop

Tower Glass Display Case in Black Aluminium With LED

$820.00

Tall black aluminium glass display case with four shelves, an internal LED bar and a lockable base box, sized 1.0 x 0.45 x 2.0 m. Price range: USD 300-1,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Black Aluminium Tower

A black aluminium tower carries this glass display case to 2,000 mm. The frame is 40 mm alloy extrusion with a matte black coat. Glass panels sit in a slot on all four sides, so the case reads as a box of light. Width is 1,000 mm and depth 450 mm. The top cap holds the light bar and adds a 150 mm band. A base box of 350 mm gives storage and lift. This glass display case suits a dark shop wall. The display cases range keeps the same extrusion.

black aluminium display tower

Shelves and Light

Four glass shelves divide this glass display case into five levels. Shelves are 8 mm glass with polished edges, rated 15 kg. Clamps sit on the uprights and move in 30 mm steps. An LED bar runs under the top cap at 3000 K, about 10 W per metre. Light spreads through a diffuser, so no diode shows on the glass. Top shelf reads near 1,750 mm, just above adult eye line. Every glass display case we build gets a light check on the bench. countertop cases units share the diffuser.

display tower front view

Base Box

A base box sits under this glass display case at 350 mm tall. The box is alloy frame with a black panel face and two hinged doors. Doors carry a cam lock each, so stock stays covered after hours. Inside, one shelf splits the space for boxes and bags. Feet are four adjustable pads with a 20 mm range. Cables run through a grommet at the rear. cash counter counters often use the same box. This glass display case sits level on tile or stone.

display tower side view

Build and Assembly

Extrusions are cut on a saw and joined with corner keys, so no weld shows. Glass is cut and polished, then packed in a sleeve. The frame ships partly assembled with the base box built. Two people set up a unit in about 45 minutes with a hex key. Glass drops into the slots from the top, then the cap goes on. Every glass display case is squared and lit before crating. retail display fixtures crews add the shelf clamps last.

top LED bar detail

Where It Stands

This glass display case suits watches, collectibles and small tech. A 1 m footprint fits a 3 m wall with two units and a gap. Black frame hides handling marks and cable shadows. The tall format puts five price bands in one square metre. The base box keeps spare stock off the shop floor. Staff restock from the front door pair. Many food and drink shops shops use one tower at the entrance. The shop fit outs package adds a low bench beside it.

Price and Custom Build

A black extrusion frame keeps a tall case light and stable. An internal LED bar lights stock, not the room. A base box gives storage in the same footprint. List price starts at USD 820 for the 1 m unit. A 1.2 m build with six shelves lands near USD 1,120. ukiosks builds this glass display case to order in Shenzhen. We can reset height, shelf count, light colour and frame finish. Send your plan and we return drawings and a quote.

Specification Detail
Overall size 1.0 x 0.45 x 2.0 m (custom 0.8-1.4 m)
Frame 40 mm black aluminium extrusion
Glass 8 mm shelves, 6 mm panels
Shelves Four shelves, 15 kg each
Lighting LED bar at 3000 K, 10 W per metre
Base Lockable box, 350 mm tall
Packing Two crates, about 115 kg

Reviews

There are no reviews yet.

Be the first to review “Tower Glass Display Case in Black Aluminium With LED”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop