UniqueKiosk · Shenzhen workshop

Countertop Glass Display Case With Brass Base

$420.00

Small glass display case for a counter top, with clear glass on all sides, a brass base and LED spots. Price range: USD 300-1,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Small Counter Case

A small glass display case puts one line of stock at the till point. This unit is 600 mm wide, 450 mm deep and 500 mm tall. The glass box lifts off the base, so a staff member reaches in from any side. A brass base runs 80 mm tall and holds the wiring. The top is glass too, so a shopper looks down on the goods. Weight lands near 18 kg, light enough for one person to move. The countertop cases range lists sizes from 400 mm up.

countertop glass display case

Glass on Four Sides

Clear glass on four sides lets this glass display case sell from every angle. Panels are 6 mm glass with polished edges, set in a slim brass channel. The top panel sits on the side panels with a clear silicone bed. Corners have a 2 mm gap, so a knock does not chip an edge. A staff member lifts the whole box off to restock. Every glass display case we build gets an edge polish before packing. The box weighs about 9 kg on its own.

countertop case front view

LED and Deck

LED spots sit under the top of this glass display case. A strip of 24 V diodes faces the deck, at 3000 K. The deck is a white acrylic panel that spreads light across the full floor. Output is about 8 W for the 600 mm size. A switch sits at the front of the brass base, wired to a 1.8 m lead. Light makes a ring or a watch read at 2 m in a dim shop. display cases cases use the same deck panel. This glass display case ships with clear fitting notes.

countertop case side view

Build and Finish

The brass base is 1.2 mm sheet folded into a tray. Corners are welded and ground, then brushed by hand. The glass box is cut and polished as one set, so panels match in height. Feet are four rubber pads, so the case does not scratch a counter. Wiring runs in the base tray with a grommet at the rear. Every glass display case gets a 30 minute light test before crating. retail display fixtures buyers often order two for a paired display.

brass base switch detail

Where It Sits

This glass display case suits a jewellery counter, a watch bar and a hotel desk. A 600 mm footprint leaves room for a card reader and a tray. Height at 500 mm keeps the goods inside a seated shopper sight line. Two units side by side cover a 1.2 m run with a 20 mm gap. Power comes from one socket behind the counter. Labels sit on the deck, not the glass. Many cash counter counters carry one at the corner. The shop fit outs package adds a small riser.

Price and Custom Build

A small glass box on a counter sells a high value piece without a floor case. A brass base reads warm under shop light. A lit white deck makes a plain ring look bright. List price starts at USD 420 for the 600 mm unit. A 900 mm build with two light lines lands near USD 620. ukiosks builds this glass display case to order in Shenzhen. We can reset width, base finish, light colour and deck colour. Send your plan and we return drawings and a quote. Nearby food and drink shops tills use the same case.

Specification Detail
Overall size 600 x 450 x 500 mm (custom 400-900 mm)
Glass 6 mm clear, polished edges, four sides
Base 1.2 mm folded brass, brushed finish
Deck White acrylic light panel
Lighting 24 V LED strip at 3000 K, about 8 W
Feet Four rubber pads
Packing One carton, about 18 kg

Reviews

There are no reviews yet.

Be the first to review “Countertop Glass Display Case With Brass Base”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop