UniqueKiosk · Shenzhen workshop

Hotdog Cart in Stainless With Blue Umbrella and Sink

$2,900.00

Stainless food cart with a blue umbrella, twin sinks and a cooking deck, sized 2.0 x 0.9 m for street corners. Price range: USD 2,000-6,600, set by size and cooking fit out.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Stainless Deck and Body

A stainless body carries this food cart, welded on a 30 mm tube frame. The deck measures 2.0 m by 0.9 m and sits at 900 mm. Cooking plates and a warming pan drop into the left half of the deck. Body panels are 1.0 mm 304 grade with a brush finish. The counter face holds four valve knobs on a front rail. A single wheel and a castor sit at the rear right. This food cart cleans down with water and a cloth. The food and drinks corner spot fits this deck size.

stainless hotdog cart

Blue Umbrella and Sink

A blue umbrella shades the deck on a centre pole. The canopy is 2.2 m across, bolted to the deck through a steel socket. Twin stainless sinks sit at the right end, with a mixer tap between them. Each bowl is 300 mm by 250 mm and 200 mm deep. A drain hose runs under the cart to a waste tank. The shelf rail at the back holds boxes and bags. Every food cart we build keeps a sink within one step of the deck.

hotdog cart front view

Wheels and Towing

One wheel and a swivel castor carry this food cart at low speed. A draw bar sits at the right end for a tow handle or a small vehicle. Screw jacks level the body when the cart is parked on a slope. Body weight lands near 110 kg empty. The deck height stays at 900 mm after levelling. A brake lever locks the wheel for a sloped pitch. display cases glass can be added over the cooking plates.

hotdog cart side view

Build and Finishing

Deck sheets are folded from one piece, so the top has no seam at the cooking line. Sinks are pressed bowls welded into the deck, then polished. Weld runs get a pickle pass before a brush finish. Umbrella poles are welded tube with a socket plate. Every food cart is assembled once and leak tested in the workshop. cash counter counters use the same sink module. countertop cases cases fit the shelf rail for a night market.

sink deck and shelf rail

Site Use

Setup takes one person about 15 minutes. Fill the waste tank, open the umbrella, light the burners. Water comes from a 20 L tank under the deck. A gas bottle sits on a tray at the right end. The footprint is 2.0 m by 0.9 m with the umbrella out. Clean down is a cloth, a scraper and a sink rinse. retail display fixtures spacing rules keep a 1 m gap between carts on a pitch. This food cart fits a 2.2 m bay.

Price and Custom Build

A sink on the cart means one stop for cooking and washing. An umbrella shades the deck without a full roof. Twin bowls let one sink hold soapy water all day. List price starts at USD 2,900 with sinks and the umbrella. A plain deck food cart without sinks lands near USD 2,200. ukiosks builds this food cart to order in Shenzhen. We can reset deck length, sink count, umbrella colour and plate layout. Send your plan and we return drawings and a quote. Nearby coffee fit-outs counters and countertop cases cases share the same deck module.

Specification Detail
Overall size 2.0 x 0.9 x 1.0 m (custom 1.6-2.6 m)
Body 1.0 mm 304 stainless on tube frame
Sinks Twin bowls, 300 x 250 x 200 mm, mixer tap
Umbrella 2.2 m canopy on steel pole and socket
Cooking Two plates and a warming pan socket
Wheels One wheel, one castor, draw bar
Packing One crate, about 110 kg

Reviews

There are no reviews yet.

Be the first to review “Hotdog Cart in Stainless With Blue Umbrella and Sink”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop