UniqueKiosk · Shenzhen workshop

Burger Cart in Stainless With Yellow Awning and Griddle

$3,200.00

Stainless food cart with a yellow awning, a three shelf glass cabinet and a flat griddle, sized 1.9 x 0.9 m for street pitches. Price range: USD 2,000-6,600, set by size and cooking fit out.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Stainless Cart Body

Stainless sheet wraps this food cart on a welded frame. The body measures 1.9 m by 0.9 m and stands 900 mm to the work top. A storage door sits under the counter with a magnetic catch. A drawer above holds tongs, cloths and a card reader. Panels are 1.0 mm 304 grade, brushed on the outside. Two wheels sit at the rear, one swivel castor at the front. This food cart cleans down with water and a cloth after a shift. The food and drinks pitch at a night market suits this size.

stainless burger cart

Yellow Awning and Cabinet

A yellow fabric awning covers the work zone on two steel posts. The awning posts bolt to the cart frame with a plate at the base. An upright glass cabinet stands at the left, 500 mm wide and 900 mm tall. Three shelves sit inside, each rated for 12 kg. Glass is 4 mm tempered with a stainless surround. Bread, buns and boxes stay in view but out of the street dust. Every food cart we build keeps the cabinet on the service side. display cases cases use the same frame profile.

burger cart front view

Griddle and Heat

A flat griddle plate sits at the right of this food cart. The plate is 8 mm steel, 600 mm wide, over two burners. Valves sit on a front rail, away from the flame. A splash guard runs along the back edge. Heat runs from a gas bottle under the cart. A drip tray slides out for cleaning. The griddle reaches 200 C in about six minutes. cash counter counters in a shop can share the same plate fit out. Venting is open air, so this cart works outdoors only.

burger cart side view

Build and Finish

Sheets are laser cut, folded and welded to a 30 mm tube frame. Weld seams get a pickle pass, then a brush finish. The awning frame is welded tube with a coated fabric cover. Glass shelves are fitted with rubber edge strips. Every food cart is assembled once and heat tested in the workshop. A cover or a second cabinet can be added at build stage. countertop cases glass tops fit the counter if a shop needs a display line.

griddle plate and valves

Use on Site

One person can push this food cart on level ground. Setup takes about 20 minutes, mostly awning posts and gas. The footprint is 1.9 m by 0.9 m with the awning open. Power is not needed unless lights are added. Two gas bottles last a full market day at medium heat. Clean down takes a cloth and a scraper for the plate. retail display fixtures spacing rules apply between carts on a pitch. This food cart fits a 2 m bay.

Price and Custom Build

A griddle on the cart cuts the walk to a back kitchen. A glass cabinet shows stock without opening a lid. Stainless takes hits from trolleys and still cleans. List price starts at USD 3,200 with the cabinet and griddle. A plain cart with cabinet only lands near USD 2,400. ukiosks builds this food cart to order in Shenzhen. We can reset body length, cabinet shelves, griddle width and awning colour. Send your plan and we return drawings and a quote. Nearby coffee fit-outs counters and food stands use the same frame.

Specification Detail
Overall size 1.9 x 0.9 x 1.4 m (custom 1.6-2.4 m)
Body 1.0 mm 304 stainless on tube frame
Cabinet Glass cabinet, three shelves, 12 kg each
Griddle 8 mm steel plate, 600 mm, two burners
Awning Welded tube frame with coated fabric
Wheels Two rear wheels, one front castor
Packing One crate, about 130 kg

Reviews

There are no reviews yet.

Be the first to review “Burger Cart in Stainless With Yellow Awning and Griddle”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop