UniqueKiosk · Shenzhen workshop

Donut Kiosk in White With Blue Band and Two Glass Cases

$12,900.00

White bakery kiosk with a blue band, two curved glass cases, overhead screens and a lit canopy, sized 4.2 x 3.2 m for mall food courts. Price range: USD 9,000-15,000, set by size and screen count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

White Body and Blue Band

White laminate panels carry this bakery kiosk, with a blue band at 700 mm. The band is 120 mm high and wraps every block. Panel joints sit at the block lines, so lines stay clean. A blue trim also runs under the canopy edge. Rounded corners at the front block curve at 500 mm. The body stands 950 mm high and takes the case load. This bakery kiosk keeps two colours and no pattern, so signs read clear. The food and drinks zone gets a bright front at low cost.

white blue bakery kiosk

Two Curved Glass Cases

Two curved glass cases hold the display run. Each case is 1,500 mm long with two glass shelves. The arc front leans back, so the top row shows to the queue. Frames are bright stainless, cleaned and sealed. Glass is 6 mm tempered with a slight curve. Trays sit on both shelves, at 1,050 and 1,200 mm. A rear door lets staff reload from inside the unit. This bakery kiosk keeps pastry covered during peak hours. display cases with flat fronts show less of the top row.

bakery kiosk front view

Canopy and Screens

A white canopy sits over the counter on four posts. The canopy face carries an LED line and two screens. Screens are 43 inch, set in steel frames, facing the aisle. Content can change by the hour through a small player inside. Posts on this bakery kiosk are 60 mm square and wired for power. The canopy spans 3.2 m and clears the counter by 2.2 m. Every bakery kiosk we build can take screens at either end.

bakery kiosk corner view

Build and Assembly

Bodies are framed in 30 mm steel tube and clad in laminate. Sheets are cut, then edge banded and joined at block lines. Blue parts come from one sheet run, so tones match. Screens are packed in foam and fitted on site. LED lines run in sealed channels. Every bakery kiosk is assembled once in the workshop before crating. countertop cases cases can sit on the free counter top. cash counter drawers fit under the service block.

curved case bread trays

Fit and Delivery

The plan measures 4.2 m by 3.2 m, with the canopy at 2.6 m. It suits food court plots from 16 to 22 sqm. Weight lands near 560 kg across six crates. Screens and glass ship boxed apart from the frames. Site work is bolting blocks, then raising the canopy posts. A crew of three needs about two days. Two circuits are needed, one for lights and one for screens. retail display fixtures clearance rules apply at each counter end.

Price and Custom Build

Blue bands break up a white run in a busy food court. Overhead screens sell new items without printed boards. Curved cases lift small pastries into view. List price starts at USD 12,900 for the 4.2 m layout. A two case bakery kiosk without screens lands near USD 11,400. ukiosks builds this bakery kiosk to order in Shenzhen. We can reset band height, screen size, canopy span and case length. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters and food and drink kiosks use the same frame.

Specification Detail
Overall size 4.2 x 3.2 x 2.6 m (custom 3.2-5.0 m)
Body Coloured laminate on 18 mm plywood
Display cases Two curved glass cases, 1,500 mm each
Glass 6 mm tempered curved glass
Screens Two 43 inch screens in steel frames
Lighting Canopy LED line and plinth strip, 220 V
Packing Six crates, about 560 kg

Reviews

There are no reviews yet.

Be the first to review “Donut Kiosk in White With Blue Band and Two Glass Cases”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop