UniqueKiosk · Shenzhen workshop
Cake Counter in Wood and Stone With Open Bread Trays
$2,500.00
Wood and stone bakery counter with fluted metal panels and a rounded top for open bread trays, sized 4.0 x 0.9 m. Price range: USD 600-2,500, set by length and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Wood Frame and Metal Fluting
Wood frames hold this bakery counter together. Panels between them are fluted metal, 12 mm ribs, coated in a soft grey. Each bay is 1,200 mm wide, with a wood post at every joint. The frame sits on a black plinth, 100 mm high. Corner bays curve at a 600 mm radius. Fluting hides trolley marks that flat panels keep. This bakery counter reads as one long piece from either end. The food and drinks run gets a solid front line without gloss.
Stone Look Top
A 20 mm stone look top sits over the frame. The top is compact laminate backed on a ply core, so it holds weight without a slab. Edges take a 30 mm round trim, so no sharp line faces the aisle. Bread stacks and bagged loaves sit open on the top, no case. The top stands 900 mm high, level with a shopping trolley handle. Hot trays can land on it without marks. countertop cases cases drop on the top when a shop needs a cover. This bakery counter stays easy to clean at the end of a shift.
Rounded Ends and Detail
Both ends round off with a 600 mm radius. That curve keeps hips clear in a narrow aisle. The fluted panel stops 150 mm short of the curve, so the wood edge reads clean. A shadow gap sits under the top, 20 mm deep. The gap hides crumbs and lets air move. Panels are fixed with cam locks, so a bay can open for stock. Every bakery counter we ship uses this rounded end detail, and this bakery counter keeps it at both ends. Access from behind stays clear of the customer path.
Build and Finishing
Carcass parts are 18 mm ply with a sealed core. Wood frames are veneered and sealed twice. Fluted metal panels are formed on a roll former, then powder coated. The top is pressed and edge trimmed before assembly. Cam locks and hinges are tested on every bay. Every bakery counter is assembled once in the workshop before crating. cash counter drawers can replace one fluted bay. display cases glass cases can sit on the top if a shop needs cover.
Fit and Delivery
The run measures 4.0 m by 0.9 m, with the top at 900 mm. It suits bakery floors and open front counters. Weight lands near 240 kg across three crates. Sections join with a cam lock at the post line, so seams stay tight. Site work is levelling the plinth, then locking bays and setting the top. Two people need about four hours. No power is needed unless a case is added. retail display fixtures clearance rules apply at the curved ends.
Price and Custom Build
Open trays sell bread faster than glass, because buyers can touch the crust. Fluted panels take years of trolley hits without dents. Stone look tops hold heat better than thin laminate. List price starts at USD 2,500 for the 4.0 m run. A shorter bakery counter at 2.6 m lands near USD 1,750. ukiosks builds this bakery counter to order in Shenzhen. We can reset bay width, fluting depth, curve radius and top thickness. Send your plan and we return drawings and a quote. Nearby coffee fit-outs and food and drinks counters share the same frame.
| Specification | Detail |
|---|---|
| Overall size | 4.0 x 0.9 x 0.9 m (custom 2.6-5.2 m) |
| Body | Wood frames with fluted metal panels |
| Counter top | 20 mm stone look compact laminate |
| Ends | 600 mm radius curve on both ends |
| Plinth | Black coated steel, 100 mm |
| Access | Cam lock bays for rear stock |
| Packing | Three crates, about 240 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.