UniqueKiosk · Shenzhen workshop
Bread Kiosk With Wood Frame and Stepped Bread Shelves
$12,400.00
Wood framed bread kiosk with a house gable, stepped bread shelves and a low glass counter, sized 4.6 x 2.0 m for mall food halls. Price range: USD 9,000-15,000, set by size and shelf count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
House Gable Frame
A wood frame in a house shape tops this bakery kiosk. The gable leans forward 10 degrees and carries a blank sign panel. Frame members are 60 mm square, wrapped in wood veneer. The gable spans 2.0 m and rises 700 mm above the shelf top. Two spot lines sit in the gable face, aimed at the bread. Nothing sits on the gable, so nothing blocks the light. A bakery kiosk with this shape reads as a shop inside a shop. The food and drinks hall gets a warm anchor point at the aisle end.
Stepped Bread Shelves
Four shelf steps hold bread boards under the gable. Each step is 350 mm deep and sits 250 mm above the last. Boards are 18 mm ply with a sealed face. Steps recede, so the back row stays in view. Trays sit on the front two steps at arm height. Loaves stack on the back steps, clear of the reach line. This bakery kiosk shows four rows without a glass door. display cases with flat shelves show two rows at the same height.
Low Glass Counter
A low counter runs to the left of the gable block. The glass top sits 1,100 mm high with three shelves below. Sliding doors face the aisle, so staff reload from the front. Packaged goods and drinks fill the lower shelves. A till stands at the far left end. The counter front is clad in wood slats, with a warm LED line at the base. Every bakery kiosk we build uses this slat front on long runs.
Build and Finishing
Carcass boards are 18 mm ply with a sealed face. Frame members are cut, joined and then veneered. Slats on this bakery kiosk are machine cut to a 30 mm width, then sealed twice. Glass is 8 mm tempered for the counter top. Steel brackets tie the gable to the counter block. Every bakery kiosk is built in modules, so crates stay under 2.2 m. cash counter drawers can replace one shelf step. countertop cases cases fit the counter run as extras.
Fit and Delivery
The plan measures 4.6 m by 2.0 m, with the gable at 2.3 m. It suits food hall plots from 16 to 20 sqm. Weight lands near 460 kg across five crates. Modules ship level, glass boxed apart. Site work is joining the counter run, then fixing the gable block. Two people need about one and a half days. One 16 A circuit runs the gable spots and the base LED. retail display fixtures clearance rules apply at the counter ends.
Price and Custom Build
Long stepped runs read well from 40 m away in a food hall. A gable frame sells fresh bread better than a flat rack. Slat fronts hide trolley marks at the base. List price starts at USD 12,400 for the 4.6 m layout. A gable only bakery kiosk at 2.4 m lands near USD 9,800. ukiosks builds this bakery kiosk to order in Shenzhen. We can change gable span, shelf steps, counter length and slat width. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters reuse the same slat module.
| Specification | Detail |
|---|---|
| Overall size | 4.6 x 2.0 x 2.3 m (custom 3.2-5.2 m) |
| Body | Wood veneer on 18 mm plywood |
| Gable frame | 60 mm square wood frame |
| Bread shelves | Four stepped shelves, 350 mm deep |
| Counter | Glass top at 1,100 mm, three shelves |
| Lighting | Gable spot lines and base LED, 220 V |
| Packing | Five crates, about 460 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:
Slatwall Hook Display Stand, Timber Panel 1.9 m
Price:








Reviews
There are no reviews yet.