UniqueKiosk · Shenzhen workshop

Island Bubble Tea Kiosk in White With Wood Rails and Sink

$12,400.00

Island bubble tea kiosk with white body, light wood rails, speckled stone tops and a central stainless sink bay, sized 3.0 x 2.0 m. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

White Body and Wood Rails

A white body with light wood rails forms this bubble tea kiosk. The body is sprayed plywood, 18 mm thick, at 950 mm height. Wood rails cap the top edge and run down the outer corners. Two lit boxes sit on the back wall and one at the right end. The back wall stands 1.4 m and holds a menu board. The register sits on the left counter, close to the corner. This bubble tea kiosk keeps a clean line from any aisle direction. food and drinks halls use this white and wood mix a lot.

island bubble tea kiosk

Stone Tops and Sink Bay

Counter tops are a grey speckled stone laminate, 12 mm thick. A central stainless sink sits in a recess, set 60 mm below the top line. The sink bay holds one bowl, a tap and a drain board, sized like our display cases glass trays. Two prep zones sit either side of the sink. A blender bank and two syrup rails stand under the back wall. The front counter is clear for cups and lids. Every bubble tea kiosk needs this wet and dry split. countertop cases can drop into the right end when you sell cold items.

bubble tea kiosk front view

Working Inside the Island

Staff work inside the U shape, with two entry gaps at the rear. The inner floor area measures 1.9 m by 1.1 m, enough for two people. Bowls and trays go into the under counter bays. A bin bay sits at the back corner, out of view. The back wall hides cups and stock from the aisle. A shelf over the sink holds cleaning items. This bubble tea kiosk keeps staff close to the sink. This bubble tea kiosk keeps prep hidden while the front stays clean.

bubble tea kiosk right side

Materials and Build

Bodies use 18 mm plywood with a sprayed two pack face. Wood rails are veneered and sealed against moisture. Counter tops take a stone laminate with a 20 mm edge. Steel posts and rails are 40 mm tube, matte coated. Glass, where fitted, is 5 mm tempered. Every bubble tea kiosk is assembled once in the workshop. Joints are checked against the drawing set before packing. cash counter parts share the same bolt spacing.

sink bay counter detail

Plot Fit and Delivery

The plan measures 3.0 m by 2.0 m, with height at 2.3 m. It suits plots from 12 to 18 sqm with a queue strip. Weight lands near 350 kg across four crates. Sections ship upright, glass and taps boxed apart. Site work is joining sections, then setting tops and the sink. A crew of two needs about one and a half days. One 16 A circuit serves lights and prep gear on a bubble tea kiosk this size. retail display fixtures rules cover floor plates at the counter ends.

Price and Custom Options

Island shapes let customers walk around the unit. That keeps the queue from blocking one aisle. White bodies show marks, so the wood rails take the knocks. List price starts at USD 12,400 for the 3.0 m build. ukiosks builds this bubble tea kiosk to order in Shenzhen. We can change the back wall height, sink position, rail colour and box count. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters use the same white body and rail profile.

Specification Detail
Overall size 3.0 x 2.0 x 2.3 m (custom 2.6-3.6 m)
Body Two pack spray on 18 mm plywood
Rails Light wood veneer, sealed
Counter top 12 mm stone look laminate
Sink bay Stainless bowl, tap and drain board
Lighting Three LED light boxes, 220 V
Packing Four crates, about 350 kg

Reviews

There are no reviews yet.

Be the first to review “Island Bubble Tea Kiosk in White With Wood Rails and Sink”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop