UniqueKiosk · Shenzhen workshop
Tea Bar Kiosk in White With Glass Guard and Four Stools
$11,600.00
White tea bar kiosk with wood front band, glass counter guard, blender bank and four bar stools, sized 3.2 x 1.5 m for mall walkways. Price range: USD 9,000-15,000, set by size and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
White Body and Wood Band
A white spray body carries the front of this bubble tea kiosk. The white keeps this bubble tea kiosk bright in a dim mall. A wood band runs at counter height across the full face. The band is 250 mm deep and breaks the white mass. Two side fins rise 300 mm above the top. A lit poster box sits in the front panel, left of centre. A yellow neon cup outline marks the right bay. Edges are masked before spraying, so lines stay sharp. The food and drinks zone look suits this quiet finish.
Glass Guard and Counter
A glass guard runs the length of the back counter. The guard is 5 mm tempered, set 150 mm high on steel posts. Behind it, a blender bank of three units sits on a raised shelf. A coffee machine and grinder take the right end. The work top measures 3.2 m by 600 mm. Below, four open bays hold cups, lids and syrups. display cases of this height take the same guard posts. Serving happens over the low front counter at 950 mm.
Stools and Front Seating
Four wooden stools sit along the front counter. Each stool has a 320 mm round seat and a steel frame. Seat height lands at 750 mm, so drinks sit level with the counter edge. The stools tuck under the overhang when the unit closes. A fold-down bar shelf can replace one stool bay. Customers stay for one drink, then move on. A bubble tea kiosk with seating holds foot traffic longer, and this bubble tea kiosk seats four. cash counter space stays clear on the right side.
Materials and Build
Panels are 18 mm plywood with a sprayed two pack face. Wood bands use a veneer strip, sealed against steam. Counter tops are 1.2 mm stainless over ply. Glass is tempered and gasketed at every edge. Frame posts are 40 mm steel tube with a matte coat. Nothing is glued where a bolt will do. Every bubble tea kiosk we build gets a dry fit in the workshop. retail display fixtures parts are checked against the drawing set before spraying.
Plot Size and Delivery
The plan measures 3.2 m by 1.5 m, with height at 2.2 m. It suits mall walkway plots from 10 to 15 sqm. Weight lands near 280 kg across three crates. Sections are marked and packed upright, glass boxed apart. Site work is joining sections, then wiring the neon and poster light. Two people finish this bubble tea kiosk in one day. One 16 A circuit runs lights and the blender bank. countertop cases ship in the same crate when ordered together.
Price and Custom Work
White bodies look clean, but they show scuffs on the base. The wood band and stools fix that in one line. Neon cup outlines cost little and travel well. List price starts at USD 11,600 for the 3.2 m build. ukiosks builds this bubble tea kiosk to order in Shenzhen. We can change stool count, neon shape, wood tone and poster size on this bubble tea kiosk. Send your plan and we return drawings, sections and a quote. Nearby coffee fit-outs counters use the same guard posts and tops.
| Specification | Detail |
|---|---|
| Overall size | 3.2 x 1.5 x 2.2 m (custom 2.6-3.6 m) |
| Body | Two pack spray on 18 mm plywood |
| Front band | Wood veneer strip, sealed |
| Work top | 1.2 mm stainless steel |
| Seating | Four wood stools, 750 mm seat height |
| Lighting | LED poster box and neon outline, 220 V |
| Packing | Three crates, about 280 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.