UniqueKiosk · Shenzhen workshop

Boba Tea Kiosk in Yellow Panels With Mosaic Tile Back Wall

$11,900.00

Yellow and white boba kiosk with a curved glass counter, blue mosaic tile back wall and a lit poster panel, sized 3.4 x 1.8 m for mall sites. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Yellow Panel Front

Yellow panels give this bubble tea kiosk its front face. The colour is a sprayed two pack, not a vinyl wrap. A grey diagonal band cuts across the yellow at mid height. White panels sit above and below the band. A LED strip runs under the top edge and lights the white band. The yellow wraps around the left corner and stops at the wood end panel. Base plinths are grey aluminium, 80 mm high. Panels lift off for service access behind the counter, as on all retail display fixtures builds.

yellow boba tea kiosk

Curved Glass Counter

One long curved glass counter runs 2.2 m along the front. The case holds two trays for puddings and toppings. The curved front slopes back, so children can see the trays. Sliding doors open on the staff side only. Glass is 5 mm tempered with polished edges. Retail display cases of this curve share the same lock blocks. A white block base sits under the case of this bubble tea kiosk.

bubble tea kiosk front elevation

Mosaic Tile Back Wall

Blue mosaic tiles cover the back wall of this bubble tea kiosk. Tiles are 20 mm glass, set in white grout. The wall stands 1.2 m high behind the work counters. Tile joints stay tight, so mopping does not lift edges. A stainless sink bay and two ice bins sit under the wall. Two bin lids are white plastic, sized for 40 kg bags. The tile band also hides the joint between counter sections. coffee counter fits use the same tile height.

bubble tea kiosk side view

Cup Model and Poster Panel

A large white cup model stands at the front corner. The cup is 900 mm tall and hollow, so it moves easily. A wood end panel holds a lit poster box at eye height. The poster frame takes a 600 x 900 mm print. A small green board sits on the left counter for pick up orders. Cup and straw stock goes into open bays under the counter. Every bubble tea kiosk here ships with a spare poster frame. countertop cases travel in the same crate as the trays.

curved glass counter trays

Plot Fit and Delivery

The plan measures 3.4 m by 1.8 m, with height at 2.2 m. It fits plots from 12 to 18 sqm with a queue strip in front. Service runs from the front face, restock from the rear gap. Weight lands near 330 kg over five sections. Glass trays ship in a separate box. Site work is joining sections, then setting the case and cup model. A bubble tea kiosk of this length needs one 16 A circuit. Delivery to most ports takes five to six weeks. countertop cases can travel in the same crate.

Price and Custom Build

Yellow panels pull a young crowd, and mall agents accept them fast. The curved case keeps trays visible from both sides. Mosaic tile hides stains that plain paint shows. List price starts at USD 11,900 for the 3.4 m build. A shorter bubble tea kiosk at 2.8 m drops to about USD 10,400. ukiosks builds this bubble tea kiosk to order in Shenzhen. We can change panel colours, case length, cup model size and tile tone. Send your plan and we return drawings, sections and a quote. This bubble tea kiosk works well with a nearby cash counter. Other food and drinks tenants share the fit out crew.

Specification Detail
Overall size 3.4 x 1.8 x 2.2 m (custom 2.8-3.8 m)
Front panels Two pack spray finish on 18 mm plywood
Display counter Curved glass case, 2.2 m, two trays
Back wall 20 mm blue glass mosaic on board
Counter top 1.2 mm stainless steel
Lighting LED strip plus poster light box, 220 V
Packing Five crates, about 330 kg

Reviews

There are no reviews yet.

Be the first to review “Boba Tea Kiosk in Yellow Panels With Mosaic Tile Back Wall”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop