UniqueKiosk · Shenzhen workshop

Eyewear Retail Kiosk in Glossy Black with Glass Panels

$13,800.00

Black gloss kiosk for sunglasses and optical frames. Glass side panels hold about 180 frames with a white try-on counter; price range USD 9,000-15,000 by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Open Layout, Closed Look

An eyewear retail kiosk of this type holds three hundred frames in a compact footprint. The plan uses a 3 m by 2.4 m island with a central counter. Glass panels close the stock at night but show the range by day. Black gloss panels absorb glare from mall lighting. White inner counters keep the frames easy to read. Staff can walk the full perimeter without stepping into the aisle. Layout ideas come from our retail optical display range.

black eyewear retail kiosk

Sunglass Display Panels

Side panels use clear glass shelves on a slim metal frame. Each shelf holds four rows of sunglasses at a fixed angle. Frames face the corridor so lenses catch the light. A narrow plinth keeps the bottom row off the floor. Panels slide on rails for fast restock during trading hours. Locked glass doors protect stock after close. An eyewear retail kiosk built this way shows about 180 frames on the floor. Shelf counts follow our optical display table sizes.

sunglasses kiosk front view

Frame and Surface Build

Bodies start as 18 mm MDF, sealed and sanded before paint. The gloss black finish is a two pack polyurethane coat. Panels cure in a dust free booth to avoid nibs. Tempered glass is 8 mm thick with polished edges. Our glass display case line uses the same glass spec. Stainless steel kick plates take trolley damage on the aisle side. Joints are dowelled and screwed, not glued alone. An eyewear retail kiosk of this size ships as twelve pre-built sections.

glass sunglass display shelves

Lighting and Mirrors

Warm LED strips run along the base and wash the floor. Backlit white panels lift the black body without glare. Two adjustable mirrors stand on the counter for try-on checks. Spot lights sit above each sunglass shelf. Colour temperature stays at 3000 K across the whole unit. Every circuit has a local switch inside the cabinet. The eyewear retail kiosk uses one wiring plan for all lights. The same lighting plan applies to our optical store design projects.

optical kiosk side view

Service Counter and Storage

The counter carries a small cash drawer and a card terminal mount. Storage sits under the glass, split into trays and drawers. One bay is sized for cases, cloths and repair tools. A low plinth hides cabling and a power strip. Staff can reach stock from both sides of the island. The eyewear retail kiosk also fits a small lens edging bench. Counter sizes follow our retail display counter range.

kiosk LED base strip

Finish and Sizing Options

Practical buying advice starts with the frame count you carry. A 3 m island suits about three hundred frames. Colour, gloss level and glass type can all be changed. Logo panels are cut to artwork and backlit. Size runs from 2.4 m to 4 m in length. Our optical eyeglass store pages show longer layouts. An eyewear retail kiosk with mixed sizes can share one delivery. ukiosks designs and builds this eyewear retail kiosk to order in Shenzhen. Send your frame count and floor plan for a 3D layout and a fixed quote. List price starts at USD 13,800 for the 3 m layout.

Specification Detail
Overall size 3000 x 2400 mm, custom 2400-4000 mm
Counter height 950 mm
Body material 18 mm MDF, gloss polyurethane paint
Glass 8 mm tempered, polished edges
Display capacity About 180 sunglasses, 4 rows per shelf
Lighting 3000 K LED strip, backlit panels, spot lights
Packing 12 sections, wooden crates, pre-assembled

Reviews

There are no reviews yet.

Be the first to review “Eyewear Retail Kiosk in Glossy Black with Glass Panels”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop