UniqueKiosk · Shenzhen workshop
Satin Nickel 3 Inch Slotted Standard Hangrail Bracket, Rectangular Tubing Cradle Two Screw Locks
$1.04
3 inch slotted standard hangrail bracket for rectangular tubing, satin nickel plated steel. Fits slotted standards with 1/2 inch slots on 1 inch centers, two screw locks, upturned tabs, sold each.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Standard Bracket Design
This slotted standard bracket mounts a hangrail arm onto a vertical slotted standard. The 3 inch projection sets the rectangular tubing clear of the upright. Browse the full shop collection for standards, outriggers and bracket hardware. This slotted standard bracket holds a 1/2 by 1-1/2 inch rectangular tube. The short arm keeps the rail near the upright. The bracket ships as a single hardware unit.
Nickel Plated Finish
The slotted standard bracket is steel finished in satin nickel plate. The plate surface resists fingerprints and light scuffs in a retail fixture run. This slotted standard bracket matches silver-toned store hardware. Compare it with our 4-way black slant-arm boutique rack for coordinated display layout. The nickel coating wipes clean with a dry cloth. The satin finish softens reflections on the plate.
Two Screw Locks
The slotted standard bracket back plate carries two screw-lock knobs against the standard. The knobs tighten to hold the bracket at the chosen slot height. This slotted standard bracket stays fixed once the locks are secured. The plate spreads the contact load on the standard rail. Staff can reposition the bracket between slots. The knobs turn by hand for quick height changes.
Rectangular Tube Cradle
This slotted standard bracket arm accepts rectangular tubing sized for the rack system. The upturned tabs at the arm end keep the tube from sliding out. It pairs with our 2-way straight-arm chrome clothing rack style of upright display layout. The 2-way slant-arm chrome clothing rack shares organized fixture mounting standards. Explore the 2-way and 4-way clothing rack category for related stands. This slotted standard bracket suits boutiques, markets and stockroom standards.
Standard Slot Fit
The slotted standard bracket fits standards with 1/2 inch slots on 1 inch centers. The back plate registers against the slot pattern before the locks are tightened. This slotted standard bracket arrives sold individually for fixture installation. The waterfall-arm adjustable rack uses related hangrail mounting hardware. The tab edges guide the tube into the cradle. Each bracket is installed at the selected rail level.
Overall Product Advantages
To sum up, this slotted standard bracket extends a slotted standard with a short hangrail arm. The 3 inch reach and rectangular cradle suit compact wall fixture setups. The satin nickel plate matches light-duty retail hardware. Each slotted standard bracket is sold individually and ordered in matched pairs for a rail. Ukiosks can customize this slotted standard bracket to projection, slot fit and finish. Send your standard slot spacing and tube size to our design team. We can fabricate matched brackets for your display system.
| Parameter | Details |
|---|---|
| Bracket Type | Slotted standard hangrail bracket |
| Projection | 3 inches |
| Standard Fit | 1/2″ slots on 1″ centers |
| Tubing Hold | 1/2″ x 1-1/2″ rectangular tubing |
| Material | Steel |
| Finish | Satin nickel plated |
| Pack | Each |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.