
Six stages of a painted showcase
A paint showcase takes 6 production stages: a 140 degree bake, a 38 micron primer, a 3 coat wet on wet, a 45 minute flash, a 6 hour cure and a 24 hour pack. A shop that skips a flash ships a case that dulls in 7 months. Mark it on the card too, so whoever runs the next shift has the reference.
A 1.2 m painted showcase at 1,900 dollars carries 96 of a coating and 30 minutes of an oven, and a shop that drops the flash saves 20 minutes and pays a 240 re-polish mall kiosk layout. One oven cycle settles the question faster than a week of argument. None of that shows in a sample panel, which is why we print the stages on a card.
Bake at 140 degrees
A 140 degree bake for 30 minutes sets a powder coat and a 90 degree bake leaves a film soft at week 3. An oven holds 6 panels per cycle. Shops that hold the card pay nothing extra, and shops that skip a stage pay a re-polish. The same rule holds for a Shenzhen shop and a Vietnam one, with the flash line mattering in both.
An oven cycle costs 46 dollars of gas and a 90 degree cycle 28, and 18 buys a hard film. A soft film on a 1,900 case needs a re-spray at 240, and 1 case in 10 is fixture materials. We keep the alternative on the same card, so the floor manager compares a micron instead of a habit. That number belongs on a process card, because a stage agreed verbally rarely survives a rush order.

Prime at 38 micron
A 38 micron primer hides an MDF grain and a 20 micron primer shows a grain line after a top coat. A 1.2 m case carries 4.5 sqm of surface. Most of these blisters appear in a first summer, which is exactly when a short flash shows. Mark it on the card too, so whoever runs the next shift has the reference. One oven cycle settles the question faster than a week of argument.
A 38 micron primer costs 32 dollars a case and a 20 micron 18, and 14 buys a hidden grain. A visible grain drops a case to a second grade at 15 percent of 1,900, cosmetic kiosk. None of that shows in a sample panel, which is why we print the stages on a card. Shops that hold the card pay nothing extra, and shops that skip a stage pay a re-polish.

Four figures on the process card
The card is what a factory floor ticks off, and each line answers a degree, a micron or a minute retail displays. The same rule holds for a Shenzhen shop and a Vietnam one, with the flash line mattering in both. We keep the alternative on the same card, so the floor manager compares a micron instead of a habit. That number belongs on a process card, because a stage agreed verbally rarely survives a rush order.
| Stage | Number |
|---|---|
| Bake | 140 C, 30 min |
| Primer | 38 micron |
| Coats | 3 wet on wet |
| Flash | 45 min |
| Pack | 24 h cure |
Three coats wet on wet
A 3 coat wet on wet builds 120 micron in 1 pass and a 1 coat builds 40 and needs a sand between. A spray operator coats 60 sqm a shift. Most of these blisters appear in a first summer, which is exactly when a short flash shows. Mark it on the card too, so whoever runs the next shift has the reference. One oven cycle settles the question faster than a week of argument.
A 3 coat pass costs 54 dollars a case and a 1 coat 26, and 28 buys a depth. A 40 micron film on a 1,900 case shows a scratch at 3 times the rate and a touch up costs 40 a spot, and 6 a year glass showcases. None of that shows in a sample panel, which is why we print the stages on a card.

Flash and cure before a pack
A 45 minute flash lets a solvent leave a film and a 5 minute flash traps it under a top coat. A 24 hour cure lets a film reach a 2H pencil hardness. Shops that hold the card pay nothing extra, and shops that skip a stage pay a re-polish. The same rule holds for a Shenzhen shop and a Vietnam one, with the flash line mattering in both.
A 45 minute flash costs 0 of a booth time and a 5 minute flash saves 40 minutes a case, and 40 minutes is 12 of labour. A trapped solvent blisters a panel at 180 a repair, and 2 a month cash counters. We keep the alternative on the same card, so the floor manager compares a micron instead of a habit. That number belongs on a process card, because a stage agreed verbally rarely survives a rush order.

Conclusion
One forty, 38, 3, 45 and 24. Five figures carry a paint showcase kiosk design. Most of these blisters appear in a first summer, which is exactly when a short flash shows. Mark it on the card too, so whoever runs the next shift has the reference. One oven cycle settles the question faster than a week of argument. None of that shows in a sample panel, which is why we print the stages on a card.
Ask for a 140 bake and a 45 flash. A 46 oven cycle and a 12 labour minute protect 240 of a re-spray and 360 of a blister. Shops that hold the card pay nothing extra, and shops that skip a stage pay a re-polish. The same rule holds for a Shenzhen shop and a Vietnam one, with the flash line mattering in both.
Check a primer at 38 micron and a cure at 24 hours. A 38 micron hides a grain and a 24 hour cure passes a counters and towers. We keep the alternative on the same card, so the floor manager compares a micron instead of a habit. That number belongs on a process card, because a stage agreed verbally rarely survives a rush order.
