UniqueKiosk · Shenzhen workshop

Heritage Museum Display Cabinet, Glass and LED 2 m

$1,450.00

A museum display cabinet with a dark wood light box, full glass case and a white deck. Built for artefacts that need a sealed, lit view. Price range: USD 1,250-1,600, set by width and light kit.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

A Case Built for One Piece

A museum display cabinet puts one object under a sealed, lit view. This unit is 1.2 m wide and 2 m tall. A dark wood light box sits on top of a full glass case. A white deck holds the object at 700 mm from the floor. The glass runs clear from deck to top box. A museum display cabinet like this keeps dust off a fragile piece. A museum display cabinet of this size takes most ceramic and glass pieces. Add a lock and light kit for a second case.

Light Box on Top

The top box is 350 mm high in dark bronze wood veneer. Six LED spots sit under it at 3000 K. A stepped cornice hides the fixings and cable runs. A museum display cabinet needs light from above only, so the spots angle in. Heat stays out of the case, because the lamps sit outside the glass. A dimmer can be added at order. A museum display cabinet with six spots reads even from the front edge. Spots sit in our display case light range.

Specification Detail
Size 1200 x 550 x 2000 mm
Case Glass 8 mm tempered, low iron
Top Box Dark bronze wood veneer, 350 mm
Deck White laminate, 250 mm high
Lighting Six LED spots, 3000 K
Access Sliding glass panel with lock
Base Dark plinth, 100 mm high

Glass and Deck

Case glass is 8 mm tempered low iron, so the edge reads neutral. A museum display cabinet with low iron glass shows true colour on ceramics and paper. The deck is white laminate at 250 mm high, with a void for a silica tray. Glass panels overlap at the corner, so no frame bar crosses the view. Silicone seals sit at the deck joint. A museum display cabinet at this height needs two people to lift the glass.

Access and Security

One front glass panel slides on a top and bottom track. A cam lock sits in the panel edge. A museum display cabinet must open without a wide swing, so the slide saves aisle space. The panel lifts out for a large object. The deck lifts off for cleaning. Base plinth is 100 mm high and hides the levelling feet. Track parts match our fixture hardware.

Where It Shows

Museums use one case per artefact bay. Private collectors place two in a study. A museum display cabinet also fits a bank lobby or a hotel heritage corner. The 550 mm depth keeps a walking route clear. Our museum display cases range covers wall formats. Pair it with a glass display case for smaller pieces. A glass case at this width also suits a small library display.

Why This Build Works

A wood top box keeps lamps outside the sealed case. Low iron glass leaves the object colour true. A sliding panel opens in a narrow aisle. A museum display cabinet like this also ships with the glass crated apart. The plinth hides feet and cable. List price starts at USD 1,450 for the 2 m unit. ukiosks can change deck height, light count and wood tone. Send your object size to our team. A store showcase covers retail use.

Reviews

There are no reviews yet.

Be the first to review “Heritage Museum Display Cabinet, Glass and LED 2 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop