UniqueKiosk · Shenzhen workshop
Brass-Finish Garment Rack with Glass Shelves, 1.2 m
$520.00
A gold stainless steel garment rack with one top rail and three glass shelves at the side. Rack and shelf in one footprint for boutiques. Price range: USD 450-600, set by shelf count and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Two Jobs in One
A garment rack usually carries hanging stock only. This frame adds three glass shelves on one side. The rail spans 1.2 m across the top. Side shelves take folded knitwear, boxes or display props. One unit then covers hanging and folded goods. Floor footprint stays at 1.2 by 0.45 m, so aisles keep their width. A garment rack with this mix suits small boutiques. A garment rack of this width also fits a 1.5 m wall bay.
Tube and Joint
The frame uses 25 mm stainless tube with a brushed gold coat. Corners are welded and polished, not bolted. Base tubes curve at the front for a softer line. Each post has a levelling foot under the base run. A garment rack built on tube keeps the shop light. Glass shelves sit on welded tabs with rubber pads. Tube wall is 1.5 mm, which holds a full rail of coats. Post spacing follows our clothing racks standard.
| Specification | Detail |
|---|---|
| Size | 1200 x 450 x 1500 mm |
| Frame | 25 mm gold stainless steel tube |
| Rail | Single top rail, 1200 mm span |
| Shelving | Three 8 mm tempered glass shelves |
| Base | Rounded tube frame with levelling feet |
| Finish | Brushed gold, satin clear coat |
| Load | 60 kg on the rail, 15 kg per shelf |
Shelf Detail
Three shelves stack at 300 mm steps on the left side. Glass is 8 mm tempered with a flat polish edge. Each shelf takes about 15 kg, enough for folded denim. Shelf tabs are fixed at order, since spacing follows stock height. This garment rack ships with shelves packed separately. A rail collar keeps hangers from drifting to one end. Shelf brackets match the retail shelving parts we stock.
Finish and Care
Gold coat is brushed, then sealed with a satin clear lacquer. Fingerprints wipe off with a dry cloth. Deep scratches are rare, since tube has no flat faces to scuff. A garment rack in this finish suits warm interiors and light floors. Matching clothing racks use the same tube profile. Glass shelves clean with a plain glass spray. Spare rail collars ship with each order. A garment rack in gold stays bright under 3000 K spots. A retail store display plan usually places it beside a mirror.
Where It Sells
Boutiques use one rack per 12 sqm of floor. Denim shops pair two racks for size runs. A garment rack also fits a pop-up bay, since it needs no wall fixing. Wedding shops hang one gown per rail end. For wall systems, see retail store fixtures. For a full fit-out, check our clothing display racks. Two staff move a loaded unit on its own feet.
Why This Build Works
Hanging stock and folded stock usually need two fixtures. This frame merges them without extra floor. The gold tube carries the eye up to rail height. Glass shelves keep the side open, so the wall stays visible. A garment rack like this also moves easily during a refit. The base curve removes a sharp corner from the aisle. List price starts at USD 520 for the 1.2 m unit. Rails match the retail shelving heights on site. ukiosks can change rail length, shelf count and tube colour on request. A store showcase pair fills the wall behind it.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.