UniqueKiosk · Shenzhen workshop

Four-Bay Jewelry Wall Display Cabinet, LED Glass Doors 3 m

$1,280.00

A 3 m wall run of four glass-door bays with LED spots and lockable base cupboards. Built for jewelry shops that need depth without floor space. Price range: USD 1,100-1,500, set by length and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wall Run Design

A jewelry display cabinet works best when it is planned wall by wall. This unit places four bays on a single 3 m line. Every bay holds one tempered glass shelf at mid height. Three LED spots sit at the top of each bay. Six lockable cupboards form the base row. Depth stops at 400 mm, which leaves aisle room in front. The whole run arrives in sections, so it fits through a standard door.

Frame and Door Build

Panels are 18 mm MDF with a woodgrain laminate face. The carcass uses panel construction, not a tube frame. Six millimetre tempered glass doors hang on silver hinges. A cam lock sits in each door and one key opens all six. Door glass stays clear, so stock reads from the aisle. This jewelry display cabinet keeps the timber shelf line visible through the panes. Edge bands match the face, so joints stay flat. It matches the base detail of our display cabinet range.

Specification Detail
Size 3000 x 400 x 2000 mm
Material 18 mm MDF, woodgrain laminate
Bays Four bays, six base doors
Shelving One 6 mm tempered glass shelf per bay
Lighting 12V LED spots, three per bay
Locks Cam lock on every door, keyed alike
Finish Woodgrain laminate, silver hardware

Light and Load

Each bay carries three 12V LED spots at the top rail. Colour sits near 3000 K, which suits gold and diamonds. The tempered shelf takes about 25 kg, spread across its length. A rear chase hides the wiring for the jewelry display cabinet. Drivers sit above the top panel and reach by step ladder. Spot aim is set at order, since case depth changes the angle. Warm light on the shelf edge lifts the stone colour. Sections join on a shared upright, so seams read as one line. Two installers set a four bay run in about three hours.

Where It Sits

These runs suit mall jewelry units and street showrooms. They also fit watch corners inside department stores. A four bay jewelry display cabinet gives four separate stories along one wall. Small shops can start with two bays and add later. See our jewelry displays for matching counters and stands. A jewelry showcase under the same LED tone keeps the room even. A four bay jewelry display cabinet reaches the site in five packs. Height stops at 2.2 m to clear most mall ceilings.

Finish Options

Standard faces come in light oak, walnut and matte white laminate. Edge bands match the face, so joints stay flat. The glass display case body can take a darker laminate for contrast. Lengths run from 1.5 m to 4 m in bay steps. A jewelry display cabinet quote changes with bay count and finish. Cam locks match our locking and lighting stock. Hinges and shelf pins ship as spares with each pack. A jewelry display cabinet quote changes with bay count and finish.

Why This Build Works

The strength here is a quiet wall that still shows stock. Four bays give clear zones without adding floor furniture. LED at the top keeps glare off the glass face. Cupboard storage below removes back room trips. A jewelry display cabinet like this also keeps the counter line free. List price starts at USD 1,280 for the 3 m run. This jewelry display cabinet is quoted per bay, not per metre. Send your wall drawing and ukiosks will resize bays and change the finish.

Reviews

There are no reviews yet.

Be the first to review “Four-Bay Jewelry Wall Display Cabinet, LED Glass Doors 3 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop