UniqueKiosk · Shenzhen workshop

Collapsible Chrome Garment Rack with Folding Frame 63 in

$96.00

A chrome folding garment rack for boutiques, showrooms and pop-up shops. Folds flat with two hinged side frames and rolls on four casters. Price range: USD 96-140, set by rail length and caster grade.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Folding Frame for Fast Setup

Retail floors change every week, so the folding garment rack has to open and close fast. Two hinged side frames carry one top rail. A steel pin locks each hinge, so the frame stays rigid under load. Folded depth is only 120 mm, which saves space in a small stockroom. Setup needs no tools at all. One person can build a display in under a minute. The folding garment rack also suits stockrooms with low ceilings. Its chrome tube frame resists rust in damp back rooms.

Chrome Tube and Caster Set

Tube walls are 25 mm chrome plated steel with a wall thickness of 1.2 mm. Welded joints are ground smooth before plating, so no sharp edges reach the fabric. Four 75 mm casters carry the folding garment rack, and the front pair swivels for tight corners. Each caster locks with a single toe press. Load rating is 68 kg spread across the rail. Layouts shift often in small shops. Buyers can compare this folding garment rack with retail store fixtures and with shop shelving before they order.

Load and Hanging Space

The top rail is 1600 mm wide and accepts standard 40 cm hangers without crowding. Height adjusts in three steps from 1350 mm to 1600 mm, which suits long coats and short tops. A centre support bar stops the rail from bowing when the folding garment rack carries heavy wool. Rated load is 68 kg, or about 40 winter jackets. Rail ends are capped with chrome collars, so hangers slide freely and never catch. The folding garment rack also stays level when one side is loaded first.

Specification Detail
Overall width 1600 mm (rail)
Height range 1350 mm to 1600 mm
Frame 25 mm chrome plated steel tube
Casters Four 75 mm, two swivel, all lockable
Load rating 68 kg
Folded depth 120 mm
Finish Polished chrome, satin or matte black

Where This Rack Works

Showrooms use it for sample runs during buyer visits. Pop-up stalls need a frame that fits a car boot, and this folding garment rack folds to 120 mm. Photo studios hang backdrops on the same rail. Hotels use it for uniform handover between shifts. Two units also work as a temporary fitting queue. A folded folding garment rack fits behind a reception desk without blocking the door. The frame suits retail store display plans and retail display fixtures sets that change weekly.

Order Notes and Options

Each folding garment rack ships flat packed in one carton with casters fitted. A spare folding garment rack can sit in a van for event days. Rail length can be cut to 1200 mm or 1800 mm on request. Finishes include polished chrome, satin brush and matte black. Casters can be swapped to 100 mm rubber wheels for rough concrete. List price starts at USD 96 for the 1600 mm chrome unit. Ask our team through the contact page for custom sizes, and check countertop display options for smaller floors. ukiosks builds this rack to order in Shenzhen, so design and size can be adjusted to your store plan.

Reviews

There are no reviews yet.

Be the first to review “Collapsible Chrome Garment Rack with Folding Frame 63 in”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop