UniqueKiosk · Shenzhen workshop

Frosted Glass Top Display Counter with Drawers, 1200 mm

$1,200.00

A white lacquer display counter with a glass hood over a lit deck and three lockable drawers. Priced at USD 1200 per unit for standard sizes.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Serves and Sells

A display counter does two jobs at once. Staff write up sales on the glass top, then unlock the deck for the stock. The hood keeps rings, vapes and watches in view during the conversation. Buyers stand at the front, so the top edge sits at 900 mm. That height suits most standing work. One display counter replaces a plain desk plus a separate showcase. The saving shows on the floor plan and on the budget line. Our retail display cases range covers counters with and without a service top.

White Lacquer Build

The carcass is 18 mm MDF, sprayed in white lacquer and sanded between coats. The finish resists fingerprints and cleans with a damp cloth. A 40 mm plinth keeps the base off wet floors and hides cable runs. The glass hood uses 6 mm tempered panels with polished edges. Inside, a diffused LED panel makes the deck glow. Light spreads evenly, so a display counter reads well under shop spot lights too. The same build appears in our countertop displays for shelf heights.

Three Lockable Drawers

Three drawers sit under the deck, each on a metal runner with a soft stop. The top drawer takes tags and tissue paper. The two lower drawers hold boxed stock up to 120 mm tall. A cam lock secures all three at once. Staff open the counter with one key during trade. Each drawer front is flush, so the display counter keeps a clean face. Daily opening and closing stay quick under counter pressure. Plan the zone with store display planning before you place the unit.

Specification Detail
Length 1200 mm standard, 900 or 1500 mm on request
Depth 600 mm work top, 500 mm showcase top
Height 900 mm working surface
Body 18 mm MDF, sprayed white lacquer
Hood 6 mm tempered glass, polished edges
Lighting 12 W LED strip, 3000 K, 24 V driver
Storage 3 lockable drawers on metal runners

Counter Lights

A 3000 K LED strip runs under the top rail. Light falls straight onto the deck and stops at the glass edge. The strip draws 12 W and runs from a 24 V driver in the plinth. A rocker switch sits on the rear panel. There is no glare in the buyer’s eyes. Staff can leave the light on all day for a display counter that works as a brand beacon. Cable entry sits low, so no lead crosses the sales floor. Our store operations notes notes cover power planning. The glass hood keeps that light inside, so the display counter stays bright and clean.

Fit and Finish

Standard length is 1200 mm, with 900 mm and 1500 mm also built. Depth runs at 600 mm for a work top or 500 mm for a pure showcase. The display counter ships assembled, with levelling feet under the plinth. Allow 900 mm of clear space in front for a buyer to stand. Place it where staff already work, not in a back corridor. Shop the wider shop display fixtures range before you fix counters. A display counter at this size suits most mall units. Send your sizes to contact our team. ukiosks builds custom designs and sizes on request.

Reviews

There are no reviews yet.

Be the first to review “Frosted Glass Top Display Counter with Drawers, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop