UniqueKiosk · Shenzhen workshop

Pedestal Jewellery Display Case with Glass Top, 450 mm

$520.00

A pedestal jewellery display case with a glass box on four tapered legs and an internal lock. Price range: USD 300-600, set by size and glass finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Box on Legs

This jewellery display case puts a clear glass box on four tapered legs. Glass panels close all four sides and the top, so a piece reads from any angle in the aisle. A white pad covers the floor of the box and lifts a ring or a chain. A thin black frame band runs under the box and carries a small cam lock. The legs lift the box to 1000 mm, close to the eye. The case is 450 mm wide, 450 mm deep and 1000 mm tall. A jewellery display case like this works as a single pedestal. One case shows one hero piece.

Frame and Glass Build

The frame is 20 mm aluminium with a black satin powder coat. Glass panels are 6 mm tempered with a polished edge. The pad is a suede faced foam board in light grey. Legs are 25 mm steel tube with a black coat and a tapered profile. The lock sits in the base band and takes one key. Load is 8 kg inside the box. Weight is 22 kg. Every jewellery display case is assembled on a flat bench, so the glass panels sit square.

Showroom Placement

Set the case on a counter or a plinth with 700 mm clear on each side. Keep the box top near 1000 mm, so a seated customer looks straight into it. Put one hero piece in each case and leave the pad mostly clear. A jewellery display case also works in a hotel lobby showcase. Three cases in a row make a small collection story. Compare jewelry displays trays or display cases counter cases. Each jewellery display case holds 8 kg.

Specification Detail
Dimensions 450 x 450 x 1000 mm
Glass 6 mm tempered, 4 sides plus top
Frame 20 mm aluminium, black satin
Legs 4 tapered steel tubes
Lock cam lock in base band
Box load 8 kg
Weight 22 kg

Load and Care

The pad holds a bust, a ring stand or a flat tray. Keep total weight under 8 kg, so the glass base stays flat. A jewellery display case at 22 kg moves with one person, which helps a restyle. Clean the glass with a soft cloth and a mild cleaner. Check the lock each week and the panel screws each quarter. Keep a spare key in the office. store operations teams wipe the glass at open and close. A jewellery display case needs two minutes of care.

Delivery and Fit

The case ships in one carton with the glass wrapped separately. One person sets it up in about 20 minutes. Fit the legs, set the box, then slide the glass panels in. Weight is 22 kg. Fit the panels before the pad goes inside, so dust stays out. Check the lock before the first piece goes in. retail displays covers other counter pieces.

Cost and Custom Build

Four glass faces let a piece read from every side of an aisle. A raised box brings a small item to eye level without a tall cabinet. Black frame lines frame a gold chain. The pad is easy to swap for a new season. A cam lock keeps a single piece secure overnight. One case fits a 450 mm counter spot. List price starts at USD 520 for the 1000 mm case. Ukiosks builds this jewellery display case in any box size, leg height and frame finish. Our team quotes from a counter plan. Browse retail displays for display pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Pedestal Jewellery Display Case with Glass Top, 450 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop