UniqueKiosk · Shenzhen workshop
Grey Eyewear Display Cabinet with Lit Canopy, 1000 mm
$1,150.00
An eyewear display cabinet with a lit canopy, vertical metal arms and a glass top drawer bank. Price range: USD 700-1,500, set by width and light count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Lit Canopy and Arms
This eyewear display cabinet sets glasses on five vertical metal arms. Each arm holds a stack of frames at a fixed pitch. A shopper reads a full style family in one line. A canopy header above the panel carries four recessed LED downlights and throws even light on the frames. Below, a glass top counter and a three drawer bank give the staff a working surface. The unit is 1000 mm wide, 450 mm deep and 1900 mm tall. An eyewear display cabinet like this fits an optical shop wall. One unit shows 60 frames.
Panel and Cabinet Build
The rear panel is 18 mm board with a white laminate face. Arms are 8 mm steel rod with a chrome finish and a 3 kg load each. The cabinet body is 18 mm plywood in a grey laminate. Drawers run on ball slides with cam locks on the top row. The glass top is 6 mm tempered. Weight is 96 kg. Every eyewear display cabinet is levelled before the canopy goes on, so the light pattern stays even.
Optical Bay Placement
Place the unit on a wall with 900 mm clear in front. A customer can then step back and try a frame. Keep the arm rows between 1200 mm and 1800 mm. Group by frame shape on one arm and by colour down the next. An eyewear display cabinet also works beside a fitting desk. Two units on one wall make a full optical run. Compare retail displays pieces or countertop displays trays. Each eyewear display cabinet shows 60 frames.
| Specification | Detail |
|---|---|
| Dimensions | 1000 x 450 x 1900 mm |
| Arms | 5 vertical, 12 frames each |
| Canopy | 4 LED downlights, 12 V |
| Top | 6 mm tempered glass |
| Drawers | 3, cam locks |
| Arm load | 3 kg each |
| Weight | 96 kg |
Load and Adjustment
Each arm takes about 12 frames, so a full panel shows 60 pairs. Keep the top arm for light metal frames. An eyewear display cabinet at 96 kg stands firm, but a wall strap helps. Adjust an arm height by sliding the bracket on the panel slot. Wipe the glass top with a soft cloth. Check the canopy lights each quarter. display cases covers counter cases near the run. One eyewear display cabinet holds 60 pairs.
Delivery and Install
The unit ships as a cabinet, a rear panel and a canopy. Two people install it in about 60 minutes. Stand the cabinet, fix the panel, set the canopy, then fit the arms. Weight is 96 kg, so a trolley is needed. Test the lights before the arms go on, because the canopy is hard to reach later. store operations teams clean the arms each week. Each eyewear display cabinet takes 60 frames.
Cost and Custom Build
Vertical arms put 60 frames in one narrow footprint. An eyewear display cabinet saves floor space. A lit canopy replaces a separate ceiling spot run. The glass top gives staff a clean place to set a frame down. Three drawers keep cases and cloths in reach. Grey hides handling marks on a busy counter. One unit fits a 1 m wall gap. List price starts at USD 1,150 for the 1900 mm unit. Ukiosks builds this eyewear display cabinet in any width, arm count and canopy length. Our team quotes from a bay measurement. Browse retail displays for display pieces, or send a plan through our contact page.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.