UniqueKiosk · Shenzhen workshop
Oak Electronics Display Cabinet with Lit Header, 1200 mm
$1,050.00
An electronics display cabinet with a lit header panel, three shelf rows and a four door base. Price range: USD 700-1,500, set by width and light options.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Lit Header Panel
This electronics display cabinet opens with a lit header panel across the top. The panel takes a soft white light. It throws a clean face over the first shelf row, so a device reads at a distance. Three shelf rows follow, each split by vertical dividers into two or three bays. A four door base closes the run and holds stock. The cabinet is 1200 mm wide, 400 mm deep and 1900 mm tall. An electronics display cabinet like this fits a tech shop wall. One unit holds 90 boxed items.
Oak Body and Shelf Build
The body is 18 mm board with a light oak laminate and a matching edge band. Shelves are 18 mm board on steel pins, so a bay can move up or down. Dividers are 15 mm board in a fixed slot. The base has four doors with push catches and no handles. Load is 20 kg per shelf bay. Weight is 112 kg. Every electronics display cabinet is squared before the header goes on, so the light face sits flat.
Shop Floor Placement
Place the cabinet on a wall with 900 mm clear in front. Keep the header near 1900 mm and the first shelf near 1600 mm, where a standing shopper looks first. Put small accessories on the top row and boxed items lower down. An electronics display cabinet also works beside a service desk. Group by device type across one row and by price down the bays. Compare retail displays pieces or retail shelving bays. Each electronics display cabinet holds 90 boxes.
| Specification | Detail |
|---|---|
| Dimensions | 1200 x 400 x 1900 mm |
| Body | 18 mm board, light oak laminate |
| Shelves | 3 rows, adjustable on pins |
| Header | 12 V lit panel, 1200 mm |
| Base | 4 doors, push catches |
| Bay load | 20 kg each |
| Weight | 112 kg |
Load and Light
Each shelf bay takes about 15 kg, so a full row carries 30 kg. Keep heavy chargers on the base and light boxes higher. An electronics display cabinet at 112 kg should take a wall strap in a public aisle. The header light runs on a 12 V driver behind the top rail. Dust the shelf edges each week, because the light shows a line. Check the driver vent each quarter. wall fixtures covers wall panels near the run. One electronics display cabinet takes 90 boxed items.
Delivery and Install
The cabinet ships as a body, a header and a door set. Two people build it in about 45 minutes. Stand the body, fix the header, fit the doors, then load the shelves. Weight is 112 kg, so use a trolley. Check the header light before the top shelf goes in. Leave 30 mm at the wall for a skirting board. store operations teams restyle the top row each month.
Cost and Custom Build
A lit header does the work of a small sign without a separate sign cost. Three shelf rows keep device boxes in reach. Fixed dividers stop a stack from sliding. A four door base hides stock and cables. Light oak suits a warm shop interior. One cabinet fits a 1.2 m bay. List price starts at USD 1,050 for the 1200 mm cabinet. Ukiosks builds this electronics display cabinet in any width, divider layout and wood finish. Our team quotes from a wall plan. Browse retail displays for display pieces, or send a plan through our contact page.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.